Models > JIC4530KS01

JIC4530KS01 Admiral Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
The top of this part is now black.
In Stock
Order now and your part arrives by Mar 21
This 10 oz bottle of cooktop cleaner is formulated to safely and effectively remove tough, baked-on residues from glass, ceramic, and porcelain surfaces. Its non-abrasive, creamy texture breaks down s...
No Longer Available
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
In Stock
Order now and your part arrives by Mar 21
This is a 3 piece set.
In Stock
Order now and your part arrives by Mar 21
The board fits behind the light lens and has LED lights that illuminate the interior of the refrigerator or freezer compartments.
In Stock
Order now and your part arrives by Mar 21
$11.50
In Stock
Order now and your part arrives by Mar 21
$162.21
This griddle can be used on gas and electric cooktops.
In Stock
Order now and your part arrives by Mar 21
No Longer Available
No Longer Available
This is a 12oz can of black spray paint.
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for JIC4530KS01

Viewing 1 of 1
Light not working
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Paul from SUDBURY, MA
Parts Used:
W11683243
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
LED Light stopped working
Removing the old unit was difficult. The light was clearly designed for installation not for ease of repair. Since I was concerned about marring the surface of the refrigerator I used a paint scraper to get under the lip of the light and another smaller paint scraper to lift the unit away from the body of the refrigerator. It does not just "pop off". I eventually did get it free without any damage to the wall of the refrigerator. The repair was then very easy. There was a connector that was easy to separate allowing for the removal of the old unit without cutting any wires. The new unit had a mating connector, which easily connected to the old connector in the refrigerator. After some pushing I was able to install the new unit into the hole in the refrigerator. It does not exactly "snap in".
28 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
fred from CHESTERFIELD, MO
Parts Used:
W11683243
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
lights out in main refrigerator
researched on line and found the wiring was in series and I the suggestion was to replace the first light in the series that was in the freezer. Ordered the replacement light board and took out the existing light and pooped in the new one. Lights now all work! 15 minutes at tops.
18 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Julie from Newnan, GA
Parts Used:
W10355051
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Baked on sauce
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce.
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!