Models > JV332*01

JV332*01 Hotpoint Range Hood

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JV332*01

Viewing 1 of 1
Section Diagram and Parts List for Hotpoint Range Hood
Section
Keep searches simple, eg. "belt" or "pump".
UNKNOWN – Part Number: WB24X5166
No Longer Available
USE GEH WB1X246 – Part Number: WB01X0246
No Longer Available
DAMPER – Part Number: WB02X2139
No Longer Available
LOCK/WASHER – Part Number: WB01X5544
No Longer Available
SPEED NUT – Part Number: WB01X0435
No Longer Available
USE GEH WB2X7372 – Part Number: WB02X7372
No Longer Available
STRAN RELIEF – Part Number: WB02X7373
No Longer Available
USE GEH WB8X198 – Part Number: WB08X0198
No Longer Available
SPRNG DAMPER – Part Number: WB09X0097
No Longer Available
USE GEH WB26X45 – Part Number: WB26X0045
No Longer Available
USE GEH WB24X10169 – Part Number: WB24X5196
No Longer Available
USE GEH WB2X2052 – Part Number: WB02X2052
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from Lynn, MA
Parts Used:
WB24X5166
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Lamp switch would not return to original position rendering the switch inoperable.
Remove 6 screws that hold the light and fan filter in place. Remove the four bolts that hold the control panel. Remove the four screws that hold the circuit board to the control panel. Disconnect the wires to the switch. Replace switch and reverse the disassembly procedure.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More