Models
>
ZV1050SF1SS
ZV1050SF1SS General Electric Range Hood
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for ZV1050SF1SS
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
Special Order
Special Order
On Order
Special Order
Special Order
Special Order
Special Order
Special Order
In Stock
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sharon from Montgomery, TX
- Parts Used:
- WB25X37025
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
lights wouldn't work
Two years ago (approximately) the lights quit working. I replace the bulbs with ones from the local hardware store; didn't work; replaced fuses; didn't work; replaced circuit board, didn't work; finally, ordered expensive recommended part and replaced fuses purchased at local dealer, WORKS! The bulbs I purchased locally were 50watt not 2
... Read more
0. I had 2 different repairmen (one GE rep) look at it,and neither one solved the problem. But it's fixed now!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tyrone from San Bernandino, CA
- Parts Used:
- WB02X10400
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Light Socket Not Working
Removed unit by removing two mounting screws attaching socket to range hood. Removed adjacent filter panel, pulled socket out through opening, and removed two screws attaching ceramic insulation base to socket. Reinstalled in reverse order.
Was this instruction helpful to you?
Thank you for voting!