Models > JN634J3

JN634J3 General Electric Range Hood

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JN634J3

Viewing 1 of 1
Section Diagram and Parts List for General Electric Range Hood
Section
Keep searches simple, eg. "belt" or "pump".
Grease/Odor Filter – Part Number: WB2X9761
$97.60
Special Order
Fan/Light Switch – Part Number: WB24X5286
This switch controls both the light and fan.
No Longer Available
Fan Blade – Part Number: WB02X10531
No Longer Available
TRIM SWITCH – Part Number: WB7X7169
No Longer Available
DISCONTINUED – Part Number: WB2X8188
No Longer Available
GROUND PLATE – Part Number: WB2X646
No Longer Available
DISCONTINUED – Part Number: WB8X259
No Longer Available
USE GEH WB1X5691 – Part Number: WB01X5691
No Longer Available
USE GEH WB2X1862 – Part Number: WB02X1862
No Longer Available
USE GEH WB6X66 – Part Number: WB06X0066
No Longer Available
DISCONTINUED – Part Number: WB2X7373
No Longer Available
DISCONTINUED – Part Number: WB7X1147
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Lois from WEST ORANGE, NJ
Parts Used:
WB2X9761
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Exhaust filter replacement
I released the old filter by unhooking the clasp that held it in place, snapped it out and snapped the new one in. Replaced the clasp. All done. Less than 2 minutes
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Theresa from BARDSTOWN, KY
Parts Used:
WB2X9761
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Ordered new filter.
took the old one out and replaced with new filter.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from LEESBURG, VA
Parts Used:
WB24X5286
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
hood light inop/ fan ok
isolate power and changed switch. Found resistor for the dim(night light) position melted. replaced switch. ops check good
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More