JV347HB General Electric Range Hood - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- JOFFRE from ALEXANDRIA, VA
- Parts Used:
- WB24X5342
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Rotary light switch broke
I shut off the electric to the range hood. removed the two screws holding the cover of the light and fan switches. Removed the knob and nut from the front of hood and pull down the broken light switch. Made a note as to which three wires went to the switch which had the connectors marked on it. detached the wire and reconnected the new switch. Secure the switch back into the hood and replaced the cover back over the switched and place the knob back on the switch.
Was this instruction helpful to you?
Thank you for voting!