Models > DH3006

DH3006 Dacor Range Hood

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for DH3006

Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
Also known as a light bulb. This bulb is used for ranges.
Special Order
In Stock
Order now and your part arrives by May 7
In Stock
Order now and your part arrives by May 7
No Longer Available
$91.58
This range hood trim lamp assembly provides bright, reliable lighting for the cooking area beneath the hood, replacing a light that is dim, flickering, or no longer working. Designed for a precise fit...
Special Order
$11.98
On Order
Special Order
In Stock
Order now and your part arrives by May 7
In Stock
Order now and your part arrives by May 7
No Longer Available
In Stock
Order now and your part arrives by May 7
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Barbara from HOUSTON, TX
Parts Used:
DE81-09033A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The rheostat controlled light failed
As I removed the broken part, I marked each wire indicating the color of the wire nut I would use for the installation of the replacement switch. With the new part, I connected the 2 yellow marked wires to the yellow supply wire. (It was "hot" - surprise!!) I connected 1 orange marked wire to one of the 2 corresponding orange wire. I then tested the switch and realized I had connected the light wire to the vent supply wire. I switched to the light supply wire, connected the fan control correctly. Life is good in my kitchen: cool and bright!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from MCKINNEY, TX
Parts Used:
DE81-02331A
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!