Models > QT20000

QT20000 Broan Range Hood

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for QT20000

Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
$39.86
In Stock
In Stock
In Stock
$180.60
In Stock
In Stock
$39.86
In Stock
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
February 7, 2023
After removing the cotter pin, how is the fan supposed to be removed?
For model number QT20000
Fix.com logo
Hello Larry, thank you for your question! We recommend following these instructions: 1. Remove the exhaust grill to get to the motor. 2. Remove the cotter pin for the fan blade that is attached to the motor. 3. Pull down on the fan blade to remove. 4. There are four small mounting bolts, loosen them, unplug the motor, and take it out. 5. Install new motor. We hope this information helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Owen
September 23, 2022
How do i test the fan to see if the fan is bad or the switch (rotates) is bad? When i turn on the fan switch (has click to off), nothing happens - no buzzing. The switch seems like it's connected to a potentiometer for fan speed and there's a small circuit board. If the switch or circuit board is bad, where do i get parts? I don't want to change out the fan if it is the switch or switch-control board.
For model number QT20000
Fix.com logo
Hello Owen, thank you for your question. We have researched your model and found that the issue is probably with the Switch, part number FIX10282272. If that does not take care of the issue, then the problem is most likely to be related to the Motor, part number FIX10432380. If you require assistance to place an order, please contact customer service. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
Larry
February 3, 2023
How to access and replace fan motor. Qt 20000
For model number QT20000
Fix.com logo
Hi Larry, thank you for contacting us. You will need to cut power or unplug the Hood before starting the repair. You will need to remove the Grease Filter to start. Once removed you will have access to the Fan Blades. Once the Blades are removed you will have access to the Wire Harness for the motor. Unplug the motor harness and remove the mounting bolts from the motor bracket. This will release the motor and you can reverse the steps to reinstall the new motor. We hope this is what you were looking for!

Was this helpful?
Thank you for voting!