Models
>
RY80940B
RY80940B Ryobi Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RY80940B
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
This thermal release valve is for pressure washers.
Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...
No Longer Available
$5.19
This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that...
In Stock
In Stock
This is a genuine OEM sourced replacement part designed for use with Pressure Washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. Thi...
No Longer Available
This is a genuine item that is made for use with Ryobi pressure washers. It is supplied directly from the original equipment manufacturer. The pump is a key component of your pressure washer as it is ...
No Longer Available
On Order
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
July 28, 2022
The cable between the pump and the engine is broken off at the pump. It connects vertically to the pump, where all that's left is a hole where water comes out under pressure when the engine is running. At the end of the cable is a hollow nut screwed into a bolt which appears to have broken off the pump where the water is coming out.What parts are required?
note model is mostly illegible but appears to be as noted and compared to other questions.
For model number RY80940B
Hi Don,
Thank you for your question. We believe the part you are referring to is idler assembly, part number FIX9939060. We have included a link to one of our YouTube videos that you may reference on how to install the idler assembly. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Common Problems and Symptoms for RY80940B
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from GULFPORT, MS
- Parts Used:
- 310437009
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
Dont order
PS9939060 Idler assembly: it is NOT an assembly as all internals are NOT included. It is a cast shell & a cable. It is not worth the trouble
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Duarte from GRISWOLD, CT
- Parts Used:
- 308452002
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Must have froze over winter (stored in garage)
Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied.
Was this instruction helpful to you?
Thank you for voting!