Models
>
K455
K455 (K 455 1.747-689) Karcher Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for K455
Viewing 5 of 5_WW_1.gif "Page A Diagram and Parts List for K 455 1.747-689 Karcher Pressure Washer")
_WW_2.gif "Page B Diagram and Parts List for K 455 1.747-689 Karcher Pressure Washer")
_WW_3.gif "Page C Diagram and Parts List for K 455 1.747-689 Karcher Pressure Washer")
_WW_4.gif "Page D Diagram and Parts List for K 455 1.747-689 Karcher Pressure Washer")
_WW_5.gif "Page E Diagram and Parts List for K 455 1.747-689 Karcher Pressure Washer")
Keep searches simple, eg. "belt" or "pump".
In Stock
Special Order
In Stock
In Stock
In Stock
In Stock
On Order
In Stock
In Stock
In Stock
In Stock
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Christel
July 13, 2022
How to bleed the pressure washer.
For model number K455
Hello Christel, Thank you for writing. Connect your garden hose to the pressure washer's inlet cover. It is important to ensure that the high pressure hose is detached from the front before you do this. Turn on the hose tap and run the water through the system for a minute or two. This will make sure that any air in the system is removed. After a couple of minutes, turn off the hose and disconnect it. You can then reattach the pressure hose. We hope this helps!
Was this helpful?
Thank you for voting!