Models > UT80953

UT80953 Homelite Pressure Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for UT80953

Viewing 2 of 2
Page A Diagram and Parts List for Homelite Pressure Washer
Page A
Page B Diagram and Parts List for Homelite Pressure Washer
Page B
Keep searches simple, eg. "belt" or "pump".
Thermal Relief Valve – Part Number: 678169004
This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...
No Longer Available
Detergent Suction Kit – Part Number: 308452002
$6.51
This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that...
On Order
Outlet Tube – Part Number: 308862003
$6.51
Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.
In Stock
Order now and your part arrives by May 28
Pressure Washer Water Hose – Part Number: 308835006
$38.32
(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.
In Stock
Order now and your part arrives by May 28
Recoil Starter Assembly – Part Number: 099980425056
$36.01
This is an original manufacturer sourced replacement part used with Homelite pressure washers. This is the starter assembly that is used to crank start the unit. It includes a plastic shroud/housing, ...
In Stock
Order now and your part arrives by May 28
Chemical Siphon Tube – Part Number: 561399003
$6.51
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution...
In Stock
Order now and your part arrives by May 28
Inlet Tube – Part Number: 308861003
$16.58
This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. ...
In Stock
Order now and your part arrives by May 28
Filter Screen – Part Number: 308662001
This is an authentic OEM sourced replacement part that is made for use with pressure washers. It is made of high-quality materials and is used to remove contaminants from the water that goes through t...
No Longer Available
Carburetor Gasket – Part Number: 099980425069
$6.51
This is a genuine manufacturer-approved replacement part which is specially designed for use with Homelite pressure washers. The purpose of this gasket is to provide a tight seal between connected par...
In Stock
Order now and your part arrives by May 28
Filter (Injection Hose) – Part Number: 518391001
No Longer Available
Fuel Tank Outlet Assembly – Part Number: 099980425080
$6.51
This item has been OEM sourced to ensure a high-level of quality. The fuel tank outlet is intended to be used with pressure washers from Homelite. This item attaches to the bottom of the fuel tank and...
In Stock
Order now and your part arrives by May 28
Fuel Tank – Part Number: 099980425077
This fuel tank is an authentic OEM item that is specially designed for Homelite power washers. It is only the metal tank itself that holds the fuel for the engine, fuel strainer and the cap are both s...
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for UT80953

Viewing 1 of 1
Leaks water
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Replacing the Thermal Relief Valve

Replacing the Thermal Relief Valve

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Duarte from GRISWOLD, CT
Parts Used:
308452002
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Must have froze over winter (stored in garage)
Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied.
7 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cheryl from BEACH PARK, IL
Parts Used:
17151Z4401100000, 099980425082, 099980425080
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Leaking hoses.
1) Loosen engine assembly from frame.
2) Remove fuel tank, hoses and disassemble other hoses and components.
3) Attach new hoses to carburetor.
4) Reassemble fuel tank, engine and carburetor components.
5) Re-center motor engine assembly onto washer frame and tighten nuts, bolts and washers as needed.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More