CT80806 Homelite Pressure Washer - Parts

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...

This is an OEM part sourced from the original manufacturer for use with pressure washers. This stainless steel spray wand screws into the trigger handle assembly, giving a 21" reach. One spray wand is included.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution...

This is an authentic OEM quick connect nozzle, guaranteed compatible with the Ryobi and Homelite machines listed below. This is a standard green pressure washer tip with a twenty-five (25) degree spr...

This is an authentic OEM nozzle made to fit the Ridgid and Homelite pressure washers listed below. As a standard sized white nozzle, this part features a forty (40) degree spray width. It is least pow...

This seal is designed for pressure washers made by Ridgid, Homelite and Ryobi. It is made of metal and fits onto the idle down assembly. A wrench may be required while replacing this part. Please keep...

This is a genuine OEM sourced replacement part. The quick disconnect is intended to be used with pressure washers from Ridgid, Ryobi, and Homelite. The quick disconnect is used a the female portion of...

This genuine manufacturer sourced replacement part that is specially produced for use with Ryobi, Ridgid and Homelite equipment. A lock nut is a type of nut that resists loosening when properly thread...

This is a genuine Homelite replacement part, sold individually. This nozzle attaches to end of the extension wand, compatible with the Pressure Washers listed below. This particular nozzle has a 0 Deg...

This is an authentic replacement part manufactured for use with Ridgid pressure washers. The special nozzle holder connects to the trigger handle assembly and is used to store the spray nozzles. This ...

This assembly uses a control wire inserted directly into the throttle arm to control engine's speed. If your engine doesn't idle down replacing this part should resolve the issue. Please make sure to ...

This is an authentic manufacturer-sourced replacement washer which is specially designed for use with pressure washers. The purpose of this part is to provide a tight seal between connected components...