Models
>
006436-0
006436-0 Generac Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 006436-0
Viewing 15 of 15
Keep searches simple, eg. "belt" or "pump".
$27.45
It is a genuine part which is supplied by the original manufacturer for use with Generac power washers. The purpose of this fitting is to connect the suction fitting. This is an identical replacement ...
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
$6.51
It is a genuine OEM item that is made for Generac power washers. This is a special component which helps to provide a tight fit between connected parts. Over time it may wear out, get damaged or lost ...
In Stock
Order now and your part arrives by Mar 31
$59.67
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most com...
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
$22.78
The lance attaches to the gun. This part is made of a metal and is available individually. This is a genuine replacement part sourced from the original manufacturer for use with Generac pressure washe...
In Stock
Order now and your part arrives by Mar 31
$25.43
This genuine Generac part is supplied by the original equipment manufacturer for use with power washers. It is utilized to provide an air-tight fit for the nozzle. Please refer to the appropriate diag...
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Stanton from PHILPOT, KY
- Parts Used:
- 0J35220153
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read more
gnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
Was this instruction helpful to you?
Thank you for voting!