Models > 006412-0

006412-0 Generac Pressure Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 006412-0

Viewing 15 of 15
Air Cleaner Diagram and Parts List for Generac Pressure Washer
Air Cleaner
Carburetor Diagram and Parts List for Generac Pressure Washer
Carburetor
Control Diagram and Parts List for Generac Pressure Washer
Control
Crankcase Diagram and Parts List for Generac Pressure Washer
Crankcase
Crankcase Cover Diagram and Parts List for Generac Pressure Washer
Crankcase Cover
Crankshaft/Piston Diagram and Parts List for Generac Pressure Washer
Crankshaft/Piston
Cylinder Head Diagram and Parts List for Generac Pressure Washer
Cylinder Head
Flywheel Diagram and Parts List for Generac Pressure Washer
Flywheel
Frame Assembly Diagram and Parts List for Generac Pressure Washer
Frame Assembly
Fuel Tank Diagram and Parts List for Generac Pressure Washer
Fuel Tank
Muffler Diagram and Parts List for Generac Pressure Washer
Muffler
Pump Assembly Diagram and Parts List for Generac Pressure Washer
Pump Assembly
Rocker/Camshaft Diagram and Parts List for Generac Pressure Washer
Rocker/Camshaft
Shrouds Diagram and Parts List for Generac Pressure Washer
Shrouds
Starter Diagram and Parts List for Generac Pressure Washer
Starter
Keep searches simple, eg. "belt" or "pump".
Fitting, Suction Pw – Part Number: 0H95650120
$27.45
It is a genuine part which is supplied by the original manufacturer for use with Generac power washers. The purpose of this fitting is to connect the suction fitting. This is an identical replacement ...
In Stock
Order now and your part arrives by May 14
Hinge Plate LH-Frame – Part Number: 0J9645
$10.99
In Stock
Order now and your part arrives by May 14
Spark Plug – Part Number: 0J00620106
$33.69
In Stock
Order now and your part arrives by May 14
Nut Lock He X M8-1.25 Nylon Insert – Part Number: 49820
This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman lawn tractor spreader attachments. The control cable controls the flow of the material being dispensed. I...
No Longer Available
Hinge Plate LH-Handle – Part Number: 0J9646
$10.99
In Stock
Order now and your part arrives by May 14
Cap-knob Handle – Part Number: 0J9741
$7.08
In Stock
Order now and your part arrives by May 14
Gasket, Carburetor – Part Number: 0J35220127
$6.51
In Stock
Order now and your part arrives by May 14
Fitting, Outlet Pw – Part Number: 0H95650123
$88.69
In Stock
Order now and your part arrives by May 14
O-ring 014x2, (pw) – Part Number: 0H95650124
$6.51
It is a genuine OEM item that is made for Generac power washers. This is a special component which helps to provide a tight fit between connected parts. Over time it may wear out, get damaged or lost ...
In Stock
Order now and your part arrives by May 14
Coil Assy., Ignition – Part Number: 0J35220153
$59.67
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most com...
In Stock
Order now and your part arrives by May 14
Hinge Plate Rh-handle – Part Number: 0J9732
$7.60
In Stock
Order now and your part arrives by May 14
Grommet-nozzle – Part Number: 0J3079
$25.43
This genuine Generac part is supplied by the original equipment manufacturer for use with power washers. It is utilized to provide an air-tight fit for the nozzle. Please refer to the appropriate diag...
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stanton from PHILPOT, KY
Parts Used:
0J35220153
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma gnetic section of the flywheel to secure the proper gap.

Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More