Models
>
580752300
580752300 Craftsman Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 580752300
Viewing 2 of 2Manuals & Guides for 580752300
Click to downloadKeep searches simple, eg. "belt" or "pump".
This is a genuine Craftsman replacement part. The chemical injector is a valve that injects chemicals into the water stream of your pressure washer. This kit has everything you need to replace the che...
No Longer Available
In Stock
In Stock
On Order
In Stock
This is a genuine OEM replacement part sourced directly from Craftsman. The thermal relief valve regulates the amount of pressure in the line at any given time. Once the pressure in the line reaches ...
No Longer Available
Special Order
In Stock
In Stock
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
May 18, 2022
Water leaks beneath the pressure washer, believe needs water pump replacement. Allen bolts are rusted. Suggestions removing the bolts and the price of the water pump
For model number 580752300
Hello Jerry, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX9919700 for the Pump Kit. All prices are shown on site. For the rusted bolts you can try to spray penetrating oil. Apply it to the bolt and then tap it using a hammer. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Anthony from RIDGEFIELD, CT
- Parts Used:
- 189971GS
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Supplied hose has "press on" fitting on one end, washer does not accommodate it
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle
... Read more
setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Read less
Was this instruction helpful to you?
Thank you for voting!