Models > 580676642

580676642 Craftsman Pressure Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 580676642

Viewing 2 of 2

Manuals & Guides for 580676642

Click to download
Keep searches simple, eg. "belt" or "pump".
In Stock
No Longer Available
No Longer Available
In Stock
This is a genuine OEM replacement part sourced directly from Craftsman. The thermal relief valve regulates the amount of pressure in the line at any given time. Once the pressure in the line reaches ...
No Longer Available
No Longer Available
Special Order
In Stock
No Longer Available
No Longer Available
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Anthony from RIDGEFIELD, CT
  • Parts Used:
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Supplied hose has "press on" fitting on one end, washer does not accommodate it
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!