Models > 9765-0-MC

9765-0-MC Briggs and Stratton Pressure Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 9765-0-MC

Viewing 3 of 3
Engine Diagram and Parts List for Briggs and Stratton Pressure Washer
Engine
Engine Long Block Diagram and Parts List for Briggs and Stratton Pressure Washer
Engine Long Block
Pressure Washer Assembly Diagram and Parts List for Briggs and Stratton Pressure Washer
Pressure Washer Assembly
Keep searches simple, eg. "belt" or "pump".
Fuel Valve With Bushing – Part Number: 192980GS
$27.80
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Order now and your part arrives by May 10
Pre-cleaner,airfltr – Part Number: G081646
$11.33
This is an original Generac replacement part manufactured for use with portable generators. The foam pre-filter traps dirt along with the main air filter to prevent contamination inside the engine. Th...
In Stock
Order now and your part arrives by May 10
Plug-spark – Part Number: 491055S
$6.51
This spark plug is designed to provide reliable ignition and efficient fuel combustion in small engine applications. Built for consistent performance and durability, it helps maintain smooth operation...
Special Order
ROLLER, DECK, BLACK – Part Number: 7073142YP
$25.70
This is an OEM part sourced directly from the manufacturer. The antiscalper roller is commonly found in Snapper lawnmowers. This part is made of high-quality plastic, and is affixed to the mower dec...
In Stock
Order now and your part arrives by May 10
Rod Governor Cntrl – Part Number: G072735
$12.01
In Stock
Order now and your part arrives by May 10
Key, 1/4X2, Square – Part Number: 703890
$7.48
This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Snapper, Briggs & Stratton, and Troy-Bilt. The metal square key is used to...
On Order
Vibe Mount, With Washer – Part Number: 191413GS
$9.94
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the...
In Stock
Order now and your part arrives by May 10
Grommet,tank – Part Number: 83465GS
$6.51
This is an authentic OEM part from Briggs and Stratton and Snapper for use with Generators. The fuel tank mounting grommet forms a cushion between the fuel tank and the fuel tank mounting bolts. The m...
In Stock
Order now and your part arrives by May 10
Grommet – Part Number: 30809GS
$6.51
In Stock
Order now and your part arrives by May 10
Gasket, ca – Part Number: G089228
$6.58
On Order
Wln, #10C – Part Number: 7091039YP
$6.51
Wln #10c
Special Order
Shcs, M6 - 1.0 X 20 – Part Number: 40945GS
$6.51
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 9765-0-MC

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PICAYUNE, MS
Parts Used:
192980GS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from RADFORD, VA
Parts Used:
192980GS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank