Models
>
09898-2
09898-2 Briggs and Stratton Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$32.00
The air cleaner element goes between the air cleaner cover and the canal cover. It is priced as an individual replacement part and helps to filter the air moving through the device. Filters will becom...
In Stock
Order now and your part arrives by Mar 26
$27.56
This authentic OEM sourced part is made for use with Murray riding lawn mowers and garden tractors. It is one of the special hanger pins which are utilized to secure suspension brackets to the main de...
In Stock
Order now and your part arrives by Mar 26
$14.68
This is a genuine Craftsman replacement part. This is a pump pistol seal, it stops water from leaking and ending up on the high pressure side of the piston. Overtime this piston seal will break down, ...
In Stock
Order now and your part arrives by Mar 26
$26.70
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Order now and your part arrives by Mar 26
$11.03
This is an authentic OEM replacement part sourced directly from Craftsman. Commonly this oil seal is used in pressure washers. The oil seal is located on the pump pistons. Over time the oil will break...
In Stock
Order now and your part arrives by Mar 26
This is an authentic Generac replacement part that has been sourced from the original manufacturer to be used with generator engines. The recoil starter is a complete part assembly that includes the h...
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
$155.95
This is an authentic replacement part sourced directly from the manufacturer. The carburetor is found in generators from Generac. This part is a complete carburetor assembly, which is used to mix fu...
In Stock
Order now and your part arrives by Mar 26
This is a genuine Generac replacement part that has been sourced from the original manufacturer to be used with portable generators. The durable plastic cover fits over the air cleaner assembly. This ...
Special Order
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 09898-2
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from PICAYUNE, MS
- Parts Used:
- 192980GS
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from RADFORD, VA
- Parts Used:
- 192980GS
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers
install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole
install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank ... Read more r />
used same technique to insert valve upward into bushing
works great!
install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole
install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank ... Read more r />
used same technique to insert valve upward into bushing
works great!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from LEES SUMMIT, MO
- Parts Used:
- 192980GS
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
major gas leak on my generator
popped out the old-----the bushing failed. replaced as per the included instructions
Was this instruction helpful to you?
Thank you for voting!