Models
>
2150 PR
2150 PR ((TYPE 3)) Poulan Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$4.99
This fuel filter is for lawn and garden equipment engines.
Fuel filter cleans the fuel before it reaches the carburetor.
Work in a well-ventilated area when installing this part. Drain the fuel...
In Stock
$4.99
This is a foam air filter for small engines, used in various types of outdoor lawn and garden equipment. This genuinely sourced air filter is sold individually. This is a very important part to add to...
In Stock
In Stock
$9.71
This is a genuine OEM replacement part sourced directly from Walbro. If the engine in your lawn and garden equipment is running rough, the carbonator might need to be cleaned and rebuilt. This kit is ...
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
August 21, 2023
How are the fuel lines routed
For model number 2150 PR
Hi Bruce, thank you for your question. We have found some instructions for you to rout the fuel lines. They may not be of the exact same model, but will help you with the process. You may follow the following steps: the line from the fuel filter in the tank goes directly through the small hole in the tank to the top nipple on the carburetor, thus giving the carburetor a constant supply of fuel when running. The primer bulb is used only for priming and does not play a part in the fuel flow after that function. The bottom nipple on the carburetor goes back to the nipple on the primer bulb, which is clearly marked as carb. The above connections are made with the smaller diameter tubing. From the primer bulb marked tank, the larger diameter tubing is routed to the large hole in the tank. The tubing goes into the tank only 1/2 to 3/4 inch. To get the tubing through the holes in the tank, cut the tubing at a slant. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
