Models
>
PP-1200
PP-1200 (Type 1E) Echo Pole Saw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PP-1200
Viewing 6 of 6_WW_1.gif "Page A Diagram and Parts List for Type 1E Echo Pole Saw")
_WW_2.gif "Page B Diagram and Parts List for Type 1E Echo Pole Saw")
_WW_3.gif "Page C Diagram and Parts List for Type 1E Echo Pole Saw")
_WW_4.gif "Page D Diagram and Parts List for Type 1E Echo Pole Saw")
_WW_5.gif "Page E Diagram and Parts List for Type 1E Echo Pole Saw")
_WW_6.gif "Page F Diagram and Parts List for Type 1E Echo Pole Saw")
Keep searches simple, eg. "belt" or "pump".
$19.91
In order to keep your equipment running strong, doing regular maintenance is critical. Your small engine should have a tune-up once per year, which consists of replacing the most common wear parts. Th...
In Stock
In Stock
$4.99
This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the...
In Stock
$7.09
This part is the replacement air filter for your small engine, used for outdoor power equipment. It has a black plastic rim that is approximately 2.5 inches by 2.5 inches. The air filter in your small...
In Stock
$5.36
This is a single OEM fuel filter that has been approved by the manufacturer, ensuring the highest quality. It is compatible with numerous types of outdoor power equipment, such as blowers, trimmers, e...
In Stock
$7.63
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has ...
In Stock
In Stock
In Stock
In Stock
$6.24
This is an OEM air filter cover, and it is sold individually. The air filter cover protects the air filter from the outer elements, to prevent excess dirt and debris from contaminating it. It is desig...
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from West Greenwich, RI
- Parts Used:
- 61029822360
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Upper driveshaft adapter replacement
1. Pull out cone shaped adapter piece (tap out or use pliers). 2. Pull out internal adapter from inside shaft by screwing in an 8MM hex bolt. Once bolt is firmly screwed in, pull or tap out. 3. Install new internal adapter into shaft. Ensure the machined end of the adapter is inserted first. Machined end will have smoother internal
... Read more
grooves when viewing from the end. 4. Install/tap on cone shaped adapter until it bottoms.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from NAPERVILLE, IL
- Parts Used:
- A369000480, 99944500071, 13211546730
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Replacing grommet that holds the fuel tubes
Any DIYer can do this. Don’t hesitate.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wayne from EASTLAND, TX
- Parts Used:
- 17500056831, 9405406201, 90070100012, 90070200032, 17500542030
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Couldn't get 'er done with y'all
Had to order from https://www.jackssmallengines.com/ just to get the correct parts we were needing. That's what we get ordering from Canada.
Was this instruction helpful to you?
Thank you for voting!