This Switch is an OEM approved replacement part for various tools and models manufactured by Delta, Black and Decker, and Porter Cable. For full compatibility, please see the "Model Cross Reference Li...
This is a single screw sourced right from the original manufacturer. It has numerous applications depending on your tool so please refer to the diagrams for your model to determine its exact location....
This safety key fits multiple hardware tools and is inserted into the switch to make it possible for your machine to turn on and operate. Tip: you can remove the key to prevent unauthorized use of the...
An OEM replacement part, this is sold individually. This screw is used to hold various parts securely in their place. An Allen wrench is needed to properly tighten and loosen this screw. Compatible...
This hex nut with internal threads, screws to the shank of a bolt or a hex cap screw in a variety of lawn and gardening tools. It can have multiple applications depending on the tool you are using. To...
This replacement set screw is a genuine OEM hardware that is specially produced for use with power equipment. A set screw is a type of screw generally used to secure an object within or against anothe...
This genuine manufacturer-sourced screw is made for Delta, Black and Decker and Porter Cable equipment. The nut is a standard hardware which may have multiple applications. Check the diagrams for your...
This is an authentic replacement part that is sourced from the original manufacturer to be used with Delt and Porter Cable woodworking power tools. This screw is a piece of general equipment that is u...
This part is priced individually. The fence lock attaches to the bracket and is made out of metal. During replacement, no tools are required to install this item correctly. It will require replacing i...
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DOUG
September 6, 2023
Jointer won't start. checked switch, where do I go now?
For model number 37-070
Hello Doug, thank you for reaching out. If the switch is ok, make sure the switch key is inserted. The switch key is a safety tool for unauthorized use of the tool. If the switch key is missing, it will prevent the jointer from running. If this is not the issue, with the switch off, measure/check the presence of 120/240 power at the plug side of the switch. If it is fine, with the switch in the ON position and the motor not running, carefully check for power at the motor terminals. If power is not present, the wire/connection to the motor assembly, part number FIX10319227, is faulty. If power is present at the motor terminals, and the motor does not run, the fault is on the motor. At this point, you need to take the motor apart. If the motor does not hum when the jointer malfunctions, then neither the running nor starting winding is exited. The problem is most likely at the motor's connection block to which both the running and starting winding are connected. We hope this solves your problem!
