16Y386 Graco Paint Sprayer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Tyler from GRESHAM, OR
- Parts Used:
- 16Y425
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The O-ring that was on my Graco Paint Sprayer was worn out and needed to be replaced
The O-ring that connects the paint container to the paint sprayer was worn out from previously using it over the past couple of years. I started to notice that air would leak in the container causing the pain sprayer to not spray paint as normal. I would have to squeeze the air out of the container and hold it so the paint would go into the pump to spray.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
Was this instruction helpful to you?
Thank you for voting!