Models > 106153320

106153320 Craftsman Paint Sprayer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 106153320

Viewing 1 of 1
Page A Diagram and Parts List for Craftsman Paint Sprayer
Page A
Keep searches simple, eg. "belt" or "pump".
Flapper Valv – Part Number: VS001800AV
$20.28
This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cyl...
In Stock
Order now and your part arrives by Mar 19
Asme Safety Valve – Part Number: V-215100AV
$34.89
This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not...
In Stock
Order now and your part arrives by Mar 19
Table Saw Pulley – Part Number: STD328022
This pully fits table saws, as well as compressors and sander polishers. Tip: check to see if motor is aligned to the pulleys by loosening the set screw and adjusting the pulleys either in or out. For...
No Longer Available
Handle – Part Number: HL001801BH
$116.25
This handle is an original replacement part supplied by the manufacturer. It is commonly used in Campbell Hausfeld air compressors. It is compatible with over 150 models. This handle is attached to th...
In Stock
Order now and your part arrives by Mar 19
Self Tap Scr 5-40x1/4 – Part Number: ST073231AV
$6.25
This is an OEM part sourced directly from the manufacturer. The screw is commonly found in Craftsman compressors and paint sprayers. This part is made of metal, and is generally used to secure the f...
In Stock
Order now and your part arrives by Mar 19
Compression Connector Assembly – Part Number: ST018300AV
$39.39
This is a genuine OEM part. The compression connector assembly is made by Campbell Hausfeld, and is compatible with many air compressor devices. The metal component secures the manifold to the compres...
In Stock
Order now and your part arrives by Mar 19
Oil Seal – Part Number: ST021600AV
$15.28
This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking betwee...
In Stock
Order now and your part arrives by Mar 19
Flat Washer, 8Pk – Part Number: STD551031
This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use wit...
No Longer Available
Check Valve – Part Number: CV201400SJ
This part is an OEM from Campbell Hausfeld for use with Air Compressors. The check valve lets pressurized airflow into the tank and prevents air from flowing back into the pump. The most common reason...
No Longer Available
Nut 8Pk – Part Number: STD541031
During the installation process, a wrench will be needed to replace this part. It may become broken or stripped and will need to be replaced. It is an authentic OEM sourced item which is specially pro...
No Longer Available
3/16 Sq Key – Part Number: STD580103
No Longer Available
Plug-drain, Oil (sqh 1/4-18) – Part Number: 27642
$6.25
On Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Francis from CROWN POINT, NY
Parts Used:
ST021600AV
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
seal on the crankshaft was leaking oil
Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down into the bottom of the cap with a long socket slightly smaller than the bore. Put a little oil on the inside of the seal and put the cap back on. Reheated the flywheel somewhat again and tapped it back on the shaft with a brass drift. Put the belt and guard back on. Started the compressor. No more oil leaking around the shaft.
Read less
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
EDWARD from PHILADELPHIA, PA
Parts Used:
VS001800AV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
KNOCKING SOUND AND LOCK UP
TURN OFF POWER TO UNIT
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More