58500K Dynabrade Orbital or Palm Sander

This is a muffler insert for a sander and it is sold as an individual item. It is sourced directly from the original manufacturer. It is located underneath the muffler cap, in the muffler body. The pu...

This is a manufacturer sourced replacement seal. It is specially produced for use with Dynabrade sanders. This is one of the seals for the tip valve/inlet bushing. Over time seals tend to shrink and c...

This is a spring for your sander. It is known as a conical spring because it is cone shaped, and coiled. It is comparable to a compression spring because it stores energy by absorbing shock, and then ...

This is a replacement lock ring is specially made for use with Dynabrade power tools. It is designed to create a seal between two connected parts. Over time o-rings will become brittle allowing for ai...

This part is genuine and sourced from original manufacturer. It is commonly found in Dynabrade sanders and grinders. A bearing will reduce friction between metal parts resulting in smoother and more e...

This genuine Dynabrade replacement part is used in various power sander models. An O-ring is made to act as a flexible part connecting solid pieces, sealing and retaining pressure inside. Assorted sty...

The muffler cap attaches to two muffler inserts and the cone muffler. This part is available as an individual replacement part and is an OEM from Dynabrade for use in sanders. It is made out of plasti...

This replacement o-ring is an original Dynabrade part that is specially produced for use with sanders, drills and grinders. It is an authentic OEM item that has multiple uses depending on your equipme...

This is an authentic Dynabrade replacement part that has been sourced from the original manufacturer to be used with orbital sanders. The isolator post is used to provide spacing between the housing a...

This is a genuine Dynabrade replacement part manufactured for use with orbital sanders, and grinders. This special valve sits in the air inlet bushing, and is supported by a spring. The valve is sold ...

This valve stem is an OEM part direct from Dynabrade. Compatible with many sander devices, the plastic stem is fitted into the speed regulator, assisting with the lever assembly. A screwdriver and a p...

This part is an OEM from Dynabrade. The speed regulator is made for use with many orbital sander devices. This item holds the valve stem in the housing assembly, and is sold individually. The plastic ...