This authentically made retainer is for nailers. It is designed to retain or fasten the retaining pins and is attached to the pins by pressing down on the beveled end. It is sold individually.
This is a Genuine OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber Material and it is Sold Individually. The purpose of this part is to create a seal so air do...
This pin is made OEM to fit the Senco tools listed below. It is used to secure trigger and safety element/guide to a nailer's main body. It is held in place by o-ring retainer # KC0062. This small pin...
This part is an OEM from the Senco manufacturer. The plastic seal is made for use with many stapler devices. This part has been made to help secure the cylinder sleeve to the stapler body. A hex key m...
This replacement seal is a high quality item that is supplied by original equipment manufacturer for use with Senco nailers and staplers. It is one of the item that helps to create an air-tight seal i...
This is the ring seal that prevents combustion gases from escaping between the piston and the cylinder wall. It is a high quality item that is supplied by original equipment manufacturer for use with ...
This is a genuine manufacturer-sourced replacement seal, it is commonly utilized on Senco nailers and staplers. It helps to distribute the pressure evenly and provide an air-tight seal for the trigger...
This is an original replacement part manufactured for use with Senco nailers. Replacing seals on nail guns is part of normal maintenance because seal can wear over time from pressure, weathering, or j...
This is a genuine item which is supplied directly from the original equipment manufacturer for use with Senco nailers and staplers. The purpose of this high-quality component is to provide an air-tigh...
It is a genuine OEM sourced item that is specially produced for use with Senco fine wire staplers. This is one of the seals for the upper piston, for correct application please refer to an appropriate...
No Longer Available
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allison
November 11, 2022
When the air hose is connected and gun is in rest position air is pouring out of the exhaust in the bottom
For model number SFW10XP
Hi Allison, thank you for reaching out to Fix. According to our research on your issue, we would recommend checking the following parts to fix your issue: the seal, part number FIX10074437, and the retainer, part number FIX10074378. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
It shoots one staple then you have to push the piston back up to shoot it again
For model number SFW10XP
Hi Ken,
Thank you for your question. If your driver will not return after firing one shot, there are some parts that you will need to check to see which one is causing the issue. You will need to check the o-rings, the bumper, the seals, the driver, the piston ring, the springs, the piston head valve, the trigger valve, the air tool oil, and the gasket. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
