Models > NS100A

NS100A Porter Cable Nailer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for NS100A

Viewing 1 of 1
Page A Diagram and Parts List for Porter Cable Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
OVERHAUL KIT – Part Number: 903775
$103.28
It is an authentic OEM sourced overhaul maintenance kit that is specially supplied for Porter Cable nailers. This kit is the manufacturer recommended solution that will help to keep your nailer operat...
In Stock
Order now and your part arrives by Jun 7
URETHANE RETAINER – Part Number: 890725
$6.51
This is a manufacturer approved urethane retainer that is sold individually. The retainer secures the pins in the nailer and are known to deteriorate with use. A damaged retainer can become loose and ...
In Stock
Order now and your part arrives by Jun 7
O-RING – Part Number: A00104
$6.82
This is an O-ring for a nailer. It is sold individually and is made of a clear rubber material. This O-ring sits between the HD, valve piston and gasket head, which can be accessed by removing the hou...
In Stock
Order now and your part arrives by Jun 7
PROTECTIVE COVER – Part Number: 884443
$6.51
This is a protective cover, which protects the air inlet coupler. This OEM part is sold independently. It is needed to keep dust and debris from making its way inside the nailer or stapler and contami...
In Stock
Order now and your part arrives by Jun 7
O-RING – Part Number: 883848
$6.51
This O-ring is sold individually and sourced directly from the original manufacturer. This O-ring is located on trigger plunger, creating a seal to the trigger valve. It is expected that this rubber O...
In Stock
Order now and your part arrives by Jun 7
PISTON RING – Part Number: 894734
$15.10
This part includes one metal OEM piston ring, used in nailers and staplers. It attaches to the top of the piston/connecting rod. It creates a seal in the cylinder, which helps to build pressure. A dam...
In Stock
Order now and your part arrives by Jun 7
O RING – Part Number: 894748
$6.51
This is a single O-ring for use in nailers and staplers. The O-ring creates an air tight seal between two or more parts. O-rings are a common wear part that can harden, break or stretch over time, so ...
In Stock
Order now and your part arrives by Jun 7
NOSE CUSHION – Part Number: 897554
$12.79
This is an OEM single nose cushion for a stapler. This small black plastic nose cap is attached to the end of the pushing lever, to help protect the working material from getting damaged by the pushin...
In Stock
Order now and your part arrives by Jun 7
O-RING – Part Number: 894746
$6.51
This is a rubber O-ring for a nailer/stapler. This authentic OEM part is sold individually. O-rings are designed to create a tight seal between components. O-rings are common wear parts that require r...
In Stock
Order now and your part arrives by Jun 7
SEAL – Part Number: 891469
$10.23
This is a manufacturer sourced replacement part. This seal is used on Porter Cable nailers/staplers. This seal plays an important role because it helps to provide and air tight seal for the piston. Ov...
In Stock
Order now and your part arrives by Jun 7
GASKET HEAD – Part Number: 894697
$12.41
This is a genuine replacement head gasket. It is sourced directly from original equipment manufacturer for use with Porter Cable nailers/staplers. Its purpose is to provide and air tight seal for the ...
In Stock
Order now and your part arrives by Jun 7
AIR TOOL OIL (18CC) – Part Number: 884293
$7.29
It is a genuine item that is specially designed for use with Black and Decker, Delta and Porter Cable nailers and staplers. Use about 5 or 6 drops of air tool oil daily before beginning to use your to...
In Stock
Order now and your part arrives by Jun 7
E-RING – Part Number: 883877
$6.51
This is a genuine replacement part from original manufacturer. It is compatible with various Porter Cable nailers and staplers. An E-ring is a type of retaining ring that is not fully sealed on one si...
On Order
View More

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
July 16, 2022
The driver on my ns100a does not retract after firing. How do i fix?
For model number NS100A
Fix.com logo
Hi Ron, Thank you for your question. If the driver on your nail gun will not return, you will need to check the o-rings, the bumper, the seals and the gaskets, the driver, the piston ring, the springs, the piston head valve and the trigger valve. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Replacing the URETHANE RETAINER

Replacing the URETHANE RETAINER

Replacing the Urethane Retainer

Replacing the Urethane Retainer

View More