Models > SDN11PTB

SDN11PTB Bostitch Nailer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for SDN11PTB

Viewing 1 of 1
Page A Diagram and Parts List for Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
KIT-TRIGGER VALVE – Part Number: TVA6
$51.65
This is a genuine Bostitch replacement part that fits all BT brad nailers and all S32 staplers. If trigger leaks air or if tool misfires often, try replacing trigger valve. This kit contains one (1) e...
In Stock
Order now and your part arrives by May 18
SEAL-CYLINDER – Part Number: N70155
$8.66
This is an individually sold cylinder seal for a nailer. As the name describes, it is placed on the cylinder of the nailer. It prevents air from leaking from inside the tool. Like all seals, it can be...
In Stock
Order now and your part arrives by May 18
O-RING-1.689X.190 – Part Number: 851439
$7.19
This is a genuine replacement part produced by original manufacturer. It is found in assorted models of Bostitch nailers. An O-ring prevents pressure loss by creating a flexible seal between rigid par...
In Stock
Order now and your part arrives by May 18
O-RING, .614X.070 – Part Number: 86459
$13.97
This item is a genuine OEM replacement part by Bostitch. It is a part of the trigger valve assembly. These parts may need replacement if air is leaking through the trigger. An O-ring is a bendable pie...
In Stock
Order now and your part arrives by May 18
BUMPER - B – Part Number: N70157
$17.24
This is an original replacement part manufactured for Bostitch stick nailers. The rubber bumper sits below the cylinder and acts as a cushion when the piston fires. Over time the bumpers can wear out ...
Special Order
BUMPER - A – Part Number: N70156
$17.87
This item is a genuine Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The rubber bumper is one of two pieces that fit under the cylin...
In Stock
Order now and your part arrives by May 18
KIT-SEQUENTIAL – Part Number: SEQ6
$23.83
This authentic OEM sourced replacement part is designed for use with Bostitch nailers and staplers. The trigger provides a user with a comfortable grip to control the sequential trigger function of th...
In Stock
Order now and your part arrives by May 18
O-RING-2.236X.115 – Part Number: 851438
$23.95
This genuine OEM O-ring is compatible with various models of Bostitch nailers and staplers. An O-ring is a flexible piece that seals connection points between rigid parts in order to prevent loss of p...
Special Order
PISTON STOP – Part Number: N80161
$8.71
This genuine manufacturer sourced replacement piston stop is specially produced for Porter Cable nailers. This part acts as a cushion when the driver retracts back into the cylinder after being fired....
In Stock
Order now and your part arrives by May 18
O-RING-1.638X.118 – Part Number: MRG041630
$7.93
This part is used in various Bostitch nailers and staplers. It is a genuine part made by original manufacturer. An O-ring is a flexible circle used to create a tight seal between rigid parts while pre...
On Order
FRAME/CAP GASKET – Part Number: 9R199852
$9.51
This is an authentic Bostitch replacement part that is OEM sourced to ensure quality. The gasket is intended to be used with pneumatic nailers. This item is used to seal the connection between the end...
In Stock
Order now and your part arrives by May 18
SPRING-COMPRESSION – Part Number: 100387
$6.51
This compression spring is an OEM direct from Bostitch. The metal spring is compatible with many stapler and nailer tools. This item is fitted within the trigger valve kit of the device. The spring is...
In Stock
Order now and your part arrives by May 18
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from Bogalusa, LA
Parts Used:
TVA6
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem re solved
Read less
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More