Models
>
SB-125BN
SB-125BN Bostitch Nailer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for SB-125BN
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$4.99
This is an OEM replacement O-ring for a nailer, sold individually. This O-ring is what seals the cylinder to the housing of the gun and creates separation between the upper and lower air chambers. Due...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
On Order
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gene
August 16, 2022
My brad nailer has not been used for more than 10 hours. I purchased it 8 or 10 years ago, but seldom use it. It was working fine, then it would not shoot out the brads, and air was coming out of the exhaust deflector. What do i need to do to make it work?
For model number SB-125BN
Hi Gene,
Thank you for your question. If air is escaping from the exhaust deflector check and make sure it is securely fastened and see if there is any damage to it. You should also check the cover and the o-rings and seals to see if they are worn or damaged. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!