Models
>
RN46-1
RN46-1 Bostitch Nailer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RN46-1
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$51.65
This is a genuine Bostitch replacement part that fits all BT brad nailers and all S32 staplers. If trigger leaks air or if tool misfires often, try replacing trigger valve. This kit contains one (1) e...
In Stock
Order now and your part arrives by Apr 23
$6.51
This is a genuine hinge pin retainer for a nailer, sold individually. The hinge pin retainer secures the hinge pins, which permit other parts of the nail gun to pivot. The retainer is made out of uret...
In Stock
Order now and your part arrives by Apr 23
$6.51
This is a single OEM feed pawl spring for a nailer. This part holds the check pawl tightly against the nails, allowing it to feed correctly. The spring is known to weaken over time, which causes play ...
In Stock
Order now and your part arrives by Apr 23
$6.51
This is a check pawl pin for a nailer, and it is sold independently. The function of this part is to secure the check pawl in place (sold separately). This check pawl pin is sourced right from the ori...
In Stock
Order now and your part arrives by Apr 23
$9.16
Genuine Bostitch replacement part, this item is sold individually. The 850607 is used in the Bostitch pneumatic tools shown below. It is used in different areas of some of these tools.. The most popul...
In Stock
Order now and your part arrives by Apr 23
$6.51
Original Manufacturer Sourced Check Pawl Spring used on some Bostitch Nailers. It is metal and sold individually. It is part of the Door Assembly providing the spring loaded tension on the Check Pawl....
In Stock
Order now and your part arrives by Apr 23
$6.51
This is a genuine manufacturer sourced replacement part designed for nailers. This o-ring provides an air-tight seal for the head valve. Over time this o-ring will shrink, become brittle and crack all...
In Stock
Order now and your part arrives by Apr 23
$70.47
This Genuine OEM rebuild kit is designed for Bostitch Nailers. It fixes common problems associated with worn out seals including misfires, air leaks and sluggish performance. This performance kit cont...
In Stock
Order now and your part arrives by Apr 23
$29.95
This is a genuine manufacturer sourced replacement part. It is commonly utilized on Bostitch nailers. The piston bumper will keep the piston from hitting the bottom of the cylinder and damaging it. Be...
In Stock
Order now and your part arrives by Apr 23
$22.70
This genuine replacement feed pawl is designed for use in various models of roofing nailers and is a key component of the tool’s feeding system. Positioned on the feed bar, the feed pawl rotates to pu...
In Stock
Order now and your part arrives by Apr 23
$6.51
This replacement rubber seal is specially designed for Bostitch nailers. It is a genuine item sourced directly from original equipment manufacturer. This part helps to provide a seal for the sleeve. P...
In Stock
Order now and your part arrives by Apr 23
$6.51
This is an OEM part direct from Bostitch. The driver guide is constructed of metal, and is compatible with several roofing and coil nailers. This item is fitted onto the bumper in the frame assembly. ...
In Stock
Order now and your part arrives by Apr 23
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Bogalusa, LA
- Parts Used:
- TVA6
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem re ... Read more solved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem re ... Read more solved
Read less
Was this instruction helpful to you?
Thank you for voting!