Models
>
11A-B2A9758
11A-B2A9758 (2019) Murray Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 11A-B2A9758
Viewing 14 of 14
Keep searches simple, eg. "belt" or "pump".
$35.34
This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces alo...
In Stock
Order now and your part arrives by Apr 9
$6.51
This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...
In Stock
Order now and your part arrives by Apr 9
$6.51
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...
In Stock
Order now and your part arrives by Apr 9
$59.91
This is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman lawn mowers. The grass bag frame supports and hold the grass bag in place, while it is col...
In Stock
Order now and your part arrives by Apr 9
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
In Stock
Order now and your part arrives by Apr 9
In Stock
Order now and your part arrives by Apr 9
$53.57
This authentic component is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. It is an identical replacement for a damaged or a missing...
In Stock
Order now and your part arrives by Apr 9
$8.91
This genuine screw is supplied directly from the original equipment manufacturer for use with Craftsman walk-behind lawn mowers and snowblowers. Check the diagrams for your model to ensure the correct...
In Stock
Order now and your part arrives by Apr 9
$7.98
This is a genuine OEM sourced replacement part designed for use with lawn mowers. This wing knob helps to secure upper and lower handles on a mower. It is made out of red plastic and it is sold indivi...
In Stock
Order now and your part arrives by Apr 9
$6.58
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple...
In Stock
Order now and your part arrives by Apr 9
$17.15
This replacement trail shield is specially designed for use on walk-behind lawn mowers. It is an authentic item that is sourced from original equipment manufacturer and it is sold individually. This p...
In Stock
Order now and your part arrives by Apr 9
$64.52
This genuine OEM grass bag is designed for use with walk-behind lawn mowers. It attaches to the rear of the mower deck to collect grass clippings during operation, helping keep your lawn clean and tid...
In Stock
Order now and your part arrives by Apr 9
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 11A-B2A9758
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Peter from San Diego, CA
- Parts Used:
- 764-04077D
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
Bag will not stay in placed when mower is running.
Repair was not effective. I used once and the bag keep getting off or blown out of the mower.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dan from LAKEWOOD, OH
- Parts Used:
- 710-04995A, 731-07487
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz
... Read more
le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from PHOENIX, AZ
- Parts Used:
- 764-04077D
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Replaced existing grass bag
The bag was slightly larger than the original. So the clips along all sides needed to be trimmed slightly to fit the existing frame. 15 minute fix and it works perfect.
Was this instruction helpful to you?
Thank you for voting!