This special screw is generally used to secure the brush holder, please refer to appropriate diagrams of your model for correct location and use of this screw. It is an authentic replacement hardware ...
This is a genuine OEM replacement part that has been sourced directly from the manufacturer. This an oval-head Torx screw that is commonly used in the assembly of power tools. Most often it is used on...
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edward
March 7, 2023
Ho do you remove cover to get top screws to remove head to remove switch ? Thanks. Eddie
For model number MM50
Hello Edward, thank you for contacting us. To remove the switch you need to follow these instructions. Remove the 3 screws from the bottom housing assembly cover. Remove the brush tension spring to remove the tension between the brush and the armature. Remove the front housing assembly which is secured by 4 screws. Remove the armature assembly, locate the switch, and replace it. Reinstall the armature assembly. Reassemble the brush tension springs and bottom housing assembly. Thread the front housing assembly screws. We hope that helps!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
