5KHM5110TBM0 KitchenAid Mixer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- CAROL from JERSEY SHORE, PA
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The wire on the one beater broke so I sent for another set of beaters. The beaters that I received are alot heavier and much nicer than the ones that came with my Kitchen Aide mixer.
I put the beaters in the mixer slots and turned on the power.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Beebe, AR
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The beaters on the small hand-held KitchenAid mixer are of such poor quality that I went ahead and ordered two pairs in anticipation of the 3rd pair (yes third pair) coming apart. So I ordered a 4th pair as insurance against the 3rd pair coming apart.
I inserted the beaters into the slots on the bottom of the mixer and we were in business.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Claudia from Bertrand, NE
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Hand mixer beater was broken
Basicly all I did was order new mixer beaters for my hand mixer. I live in the south central part of Nebraska on a farm. We are not close to any large towns, so I really appreciate finding the beaters online. The cost of a new hand mixer would be many times more than what I had to give for the parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Connie from Englewood, CO
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lost one of my beaters.
Been mixing my cookie dough with one beater for a year. Rather than replacing/buying a whole new mixer I FINALLY googled the model number and "parts." Brilliant!! Now I have two beaters again and a back up for a lot less money than buying a whole new mixer and LESS wasteful. Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- June from Dunwoody, GA
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One broken beater
Bought a new pair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bob from Lafayette, IN
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Beater Stem separated
Replaced with new beaters.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christine from West Lafayette, IN
- Parts Used:
- WPW10490648
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Wires on the beater broke.
Popped the new beaters in the holes and they fit perfect. No problem
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from Berea, OH
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I lost the beaters to my mixer!
Obviously, easy. But thanks for showing me what to buy and getting them to me promptly
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DOLORES from LA MIRADA, CA
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Meeded new beaters
All that was necessary was to install the two beaters into the housing section of the beater.Now the handmixer works perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dana from Red Wing, MN
- Parts Used:
- WPW10490648
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
one of the beaters broke
ordered the replacement pair. Looks are identical, however, the new set makes alot of noise.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brenda from Lancaster, WI
- Parts Used:
- WPW10490648
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
One of my beaters broke
I plugged the new beater into the mixer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from BEND, OR
- Parts Used:
- WPW10490648
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken beater in KitchenAid food mixer
Simply installed the NEW beaters! Everything then worked fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Colleen from Sultan, WA
- Parts Used:
- WPW10490648
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Beaters thrown away by ex-friend and thief
Received the beaters. Opened package and removed plastic. Snapped beaters into place!! Easy as that. It's too bad that KitchenAid doesn't offer much as far as attachments go. I love my mixer. I am not able to afford the BIG stand mixer so...If I wanted to continue using my mixer, I had to buy another set of beaters. I do have to say that the beaters I bought from PartSelect were of superior quality than the original beaters. Well worth it to buy another pair from PartSelect!! Thank you PartSelect!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janine from DYERSVILLE, IA
- Parts Used:
- WPW10490648
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
One of the 4 blades on a beater snapped at the top end.
I put the replacement beaters in the designated sockets exactly as indicated in the bottom of the mixer body. Essentially the same as every other time I have used this mixer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from HARRISBURG, PA
- Parts Used:
- WPW10490648
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Mixer beater broke
No repairs only replaced
Was this instruction helpful to you?
Thank you for voting!