Models
>
66365490
66365490 Kenmore Miscellaneous
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 66365490
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
This washing machine drain pump is intended for use with automatic washers that have been manufactured since 1958. The pump itself is made of plastic, though it does come with a metallic belt pulley.
No Longer Available
Common Problems and Symptoms for 66365490
Viewing 3 of 3Will not drain
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Burning smell
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from Fort Lauderdale, FL
- Parts Used:
- WP6-2022030
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Water was not being removed from the wash tub after the spin cycle
I loosened three screws to relieve the belt tension and removed the belt from the pump drive pulley. After removing the water from the wash tub I removed the intake and output hoses from the pump. I next removed the mounting screws and removed the pump. I attached the new pump loosely and re-attached the belt. I moved the pump to tighten
... Read more
the belt tension and tightened the mounting screws. I re-attached the hoses, filled with water, checked for leaks and replaced the front panel.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SHARON from DETROIT, MI
- Parts Used:
- WP6-2022030
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
washer wouldn't let the water spin out!
I was told that it might be a clog in the tube.. we check the tubes that wasn't it Then I Google it and was told it might be the drain pump. I was just glad that Part Select had what I need because my machine is over 20 years old. We change the pump and now I hope I get at least another 20 years out of my machine. I will always use part s
... Read more
elect to get my parts. Thanks
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- richard from Tarzana, CA
- Parts Used:
- WP6-2022030
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Water leak
Tilted the washing machine back at 45 degree angle. Removed three screws from the underside of machine. Slipped belt off pump. Lessened two hose clamps and removed hoses.
Lifted old pump out. Dropped new pump in place.
Screwed in the 3 screws. Slipped on the belt.
Attached two hoses. Tightened hose clamps.
Se ... Read more t washing machine upright.
No more leak.
My problem was I could not prove the pump was the source, but after switching it out I have had no problems (good enough).
Lifted old pump out. Dropped new pump in place.
Screwed in the 3 screws. Slipped on the belt.
Attached two hoses. Tightened hose clamps.
Se ... Read more t washing machine upright.
No more leak.
My problem was I could not prove the pump was the source, but after switching it out I have had no problems (good enough).
Read less
Was this instruction helpful to you?
Thank you for voting!