Models > 793829900

793829900 Kenmore Miscellaneous

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 793829900

Viewing 4 of 4
Food Grinder Head Diagram and Parts List for Kenmore Miscellaneous
Food Grinder Head
Juicer Attachment Diagram and Parts List for Kenmore Miscellaneous
Juicer Attachment
Mixer Attachment Diagram and Parts List for Kenmore Miscellaneous
Mixer Attachment
Power Unit With Blender Diagram and Parts List for Kenmore Miscellaneous
Power Unit With Blender
Keep searches simple, eg. "belt" or "pump".
Drive Motor - One Speed - 120V – Part Number: 12002351
$126.95
This one-speed, 120-volt drive motor is designed for use in top-load washing machines and plays a critical role in operating the wash basket and drain pump. It powers the spinning and agitating functi...
In Stock
Order now and your part arrives by Mar 19
HOSE-FILL – Part Number: W11629055
$33.94
Special Order
DISCONTINUED – Part Number: Y0079978
No Longer Available
INFINITE WATER LEVEL SWITCH – Part Number: 206222
No Longer Available
SOAK SWITCH HARNESS – Part Number: 205979
No Longer Available
Clip – Part Number: 73394
No Longer Available
Retainer – Part Number: 73396
No Longer Available
Rivet – Part Number: 74628
No Longer Available
Washer – Part Number: 74632
No Longer Available
SWITCH-TEMPERATURE CONTROL – Part Number: 200733
No Longer Available
Fill hose (4 feet; marked red for hot water) – Part Number: 203719
No Longer Available
KNOB, OVEN HEAT CONTROL, ABOVE – Part Number: 67236
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 793829900

Viewing 2 of 2
Burning smell
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Replacing the Drive Motor - One Speed - 120V

Replacing the Drive Motor - One Speed - 120V

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Eric from Seabeck, WA
Parts Used:
12002351
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Washer motor start windings burned up
The motor was easy to replace: unplug the wiring harness, slip off the belts, release the tension springs from the motor carriage with needle-nose pliers, and then unbolt the motor carriage with socket set and remove from the washer. Remove the pulley from the old motor with allen wrench and transfer the carriage to the new motor. Revers e operation for everything and you are back in business. The hardest part was the far back screw holding the carriage, a wobble extension helped.
Read less
37 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jeff from shepherd, MI
Parts Used:
12002351
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
motor went out
simply removed old motor and replaced with new
15 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from Windsor, CA
Parts Used:
12002351
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Washer would fill with water but not agitate, spin or drain.
Unplug the machine and disconnect the two water hoses. Use a short phillip screwdriver to remove two screws from the bottom front of the machine. Lift of the front panel to expose the motor. Lay the machine on its back on a 4 x 4 so the drain hose won't be damaged. If the screws appear rusted spary Kroil on them and let it soak for 45 - 6 0 mins. Remove the two belts. Remove the pulley via the set screw. Remove the four nuts to free the motor and slide plate. Undo all the wires. Remove the four nuts holding the slide plate. Install the new motor.
Read less
Was this instruction helpful to you?
Thank you for voting!
View More