Models > 56-4443-10-02

56-4443-10-02 Tappan Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 56-4443-10-02

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.
On Order
This part helps turn the glass turntable tray in your microwave.
No Longer Available
No Longer Available
Sold individually.
No Longer Available
This part is used to stop the flow of electrical current when the door is opened to prevent any microwave energy escaping.
Special Order
$12.00
In Stock
Sold individually.
No Longer Available
No Longer Available
No Longer Available
Special Order
Special Order
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for 56-4443-10-02

Viewing 1 of 1
Tray won’t turn
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Galen from lowanger, LA
Parts Used:
5303303047
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken carousel drive bushing
popped new peice on and that was it
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carolyn from Globe, AZ
Parts Used:
5303303047
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
plastic bushing broke --- turntable was just a non-turning table
It took me a burnt bag of Orville's popcorn to notice that the turntable wasn't turning. After a tantrum and a bit of foul language, I Googled the brand & model. Up popped Parts Select of whom I'd never heard. THE PARTS LOCATOR IS FANTASTIC! I found exactly what I needed---checked a few other sources, but found nothing. I was a bit h esitant at ordering, but decided any site as well designed and intricate as this couldn't be a fake. Next pleasant surprise was that after ordering late Dec 26, the part was on my doorstep Dec 28! I ripped open that envelope, trotted into the kitchen, and stuck that bushing right onto the thing-a-ma-gig. That baby spun like a merry-go-round! Parts Select gets 6 out of a possible 5 stars in my book!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chad from Roanoke, VA
Parts Used:
317005505
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Turntable motor was worn out - gears were slipping
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to add the gasket to the new part and run the two screws to the new motor and tighten! It don't get any easier than that! Also do not forget to plug the motor back into the female socket before attaching the bottom plate!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!