Models > R-1872-T

R-1872-T Sharp Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for R-1872-T

Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
Wall mounting plate
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
Inner door choke frame
No Longer Available
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
NANCY from OCALA, FL
Parts Used:
RMOTDA256WRZZ, QSW-MA085WRE0
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
shuts off after 59 seconds(common problem in this model)
went online detailed instructions it vworked perfectly.it even had part numbers which partselect had in stock and delivered to me in record time.THANK YOU PARTSELECT.
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daryl from Tucson, AZ
Parts Used:
RMOTDA256WRZZ, QSW-MA085WRE0
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
After 59 sec the microwave would shut off
Spent a lot of time on the internet, to discover that the problem was either the vent door motor or the position switch. Replaced both. Repair shop wanted to look at it for $250 and RV insurance had a $250 deductible. The motor appears to work, it was probably the switch, no way to test either item. The microwave now works as it should, a ll for $42 w/ shipping. Easy enough to repair. Getting it out of RV was more of a problem, but again easy if you understood how. Remove the top mounting screws, bolts, or whatever and then take out the two long diagonal screws from the grease filter areas to the upper rear. They mount into the wall plate that is the size of the back of the microwave. Place a microwave size sturdy cardboard box on stove to hold weight of microwave as it releases from the back plate.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!