NNSN942W Panasonic Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sanjeev from Novi, MI
- Parts Used:
- F63265G60AP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Microwave turntable would not turn
My Panasonic Microwave (Inverter type) turntable would not turn. Saw some basic repairs on YouTube. Access to motor was not as easy, had to saw-off motor cover at the bottom of the microwave, after removing the motor cover removed the electrical leads to the motor, replaced with the new motor, put the leads back. Now to remove the motor you need to first remove electrical plug from the socket, remove glass plate and plastics adapter.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from chicago, IL
- Parts Used:
- F63265G60AP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
it went like a dream,
easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Hingham, MA
- Parts Used:
- F06014M00AP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken glass tray
The hardest part of the repair was opening the box.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Sedona, AZ
- Parts Used:
- F63265G60AP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Dead motor
Very simple. Cut away the bottom panel. Removed the single screw. The old motors can cause a dngerous shock (according to the Net)so I wore thin rubber gloves and used needle-nose pliers with insulated handles. Removed slip-on contacts. Reversed procedure to replace motor. It took me longer to find a self-tapping screw than to replace the mtor. All finished in less than 10 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ROBERT from COLORADO SPRINGS, CO
- Parts Used:
- F06014M00AP
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Microwave Turntable Tray Cracked Due to Heat
Solution: Place tray on raised fitting moldings inside microwave. Issue: Our turntable broke "by itself" following us using our microwave without laying down any papertowel like we usually do. About a half-hour after being used to heat coffee, we heard a loud crack, and there it was in two pieces. We ordered the tray online from Parts Select, and got the replacement within 7 days.
Was this instruction helpful to you?
Thank you for voting!