Models
>
MMV4203DW00
MMV4203DW00 Maytag Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MMV4203DW00
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$11.14
This part is located under the glass cooking tray in the microwave to help it rotate.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pamela
November 5, 2021
Fan stays on when door is opened
For model number MMV4203DW00
Hello Pamela, Thank you for the question. This is normally an indication one or more of the Door Switches is defective and may need to be replaced. They can be tested with a Multimeter to see if they read Normally Open or Normally Closed. The switch its self should have printed on it NC or NO. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for MMV4203DW00
Viewing 4 of 4Tray won’t turn
Fixed by these parts
How to fix it
No heat
Fixed by these parts
How to fix it
Won’t turn on
Fixed by these parts
How to fix it
Door not closing properly
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Linda from Crescent City, CA
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Turn table wouldn't turn in my microwave.
This was no big deal. Just inserted the new gadget under the turntable. It beginning turning as soon as I pressed start on the microwave.
What I was impressed with, is that I ordered it on line, and within two days my part was sitting on my front porch. I was very happy about the delivery. I live in a remote area, and didn' ... Read more t expect it for a week. Thank you.
What I was impressed with, is that I ordered it on line, and within two days my part was sitting on my front porch. I was very happy about the delivery. I live in a remote area, and didn' ... Read more t expect it for a week. Thank you.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLARD from SHINNSTON, WV
- Parts Used:
- WPDE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
coupler under plate in microwave broken
We ordered part from store where we bought the microwave. We waited a week and the part was not the right one. I found the part I needed at your company. I received the part the next day. I just inserted the coupler in the hole where the other one was and fixed the problem imediately. We will buy all our parts here from now on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOHN C from NORTH BEACH, MD
- Parts Used:
- R0713676
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Both bulbs burned out at same time
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten
Was this instruction helpful to you?
Thank you for voting!