Models > MMV1163DS00

MMV1163DS00 Maytag Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MMV1163DS00

Viewing 3 of 3
Cabinet And Air Flow Parts Diagram and Parts List for Maytag Microwave
Cabinet And Air Flow Parts
Control Panel Parts Diagram and Parts List for Maytag Microwave
Control Panel Parts
Interior And Ventilation Parts Diagram and Parts List for Maytag Microwave
Interior And Ventilation Parts
Keep searches simple, eg. "belt" or "pump".
Grease Filter – Part Number: DE63-00196A
$41.15
Sold individually.
In Stock
High-Voltage Diode – Part Number: DE91-70063D
$36.25
In Stock
Mounting Bracket – Part Number: DE70-00561A
$62.92
Hardware is NOT included.
On Order
Microwave Light Bulb - 40W – Part Number: R0713676
Sold individually.
No Longer Available
Micro Switch – Part Number: WP3405-001034
$51.43
In Stock
Thermostat – Part Number: DE47-20034A
$36.64
In Stock
GLASS-COOK TOP LAMP;-,GL – Part Number: DE67-40063A
$38.76
On Order
Microwave High Limit Thermostat – Part Number: DE47-20059B
$35.95
In Stock
Mounting Hardware Installation Kit – Part Number: DE92-90505G
$36.89
In Stock
Assembly HOLDER-NUT;OTR6 – Part Number: DE92-90508A
$22.76
In Stock
DAMPER-MAIN;-,SECC,-,W28 – Part Number: DE72-40022A
$18.90
In Stock
LATCH-BODY;MODULAR-2,PP, – Part Number: DE66-00168A
$23.53
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for MMV1163DS00

Viewing 3 of 3
No heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing Fixing
How to fix it
Door not closing properly
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
JOHN C from NORTH BEACH, MD
Parts Used:
R0713676
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Both bulbs burned out at same time
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten
18 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ted from Hudson, NH
Parts Used:
DE91-70063D
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Buzzing noise, no heating of food
Removed control panel, discharged HV capacitor. Removed old diode, tested to confirm failure. Replaced part. Other than the removal of the panel swapping the part was almost as easy as replacing a light bulb.
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joel from CAMBRIDGE, MA
Parts Used:
DE91-70063D
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Appears to work, but food not heated
The high voltage tired was shorted. I replaced it with a new one, but that did not solve the problem.

You can test the high voltage tired with a voltmeter and a 9 V battery. Search Search for it on YouTube.

You can also test the high voltage capacitor, the high-voltage transformer, and the magnetron with a multi met er. Search for the procedures on YouTube.

I tested all these high-voltage components with a low-voltage multi meter, and they all checked out OK (after replacing the diode). However the microwave still did not heat food.

When working on a microwave it is important to unplug it and also discharge the high voltage capacitor. The capacitor has a 10 megaohm resister to automatically discharge itself, but it may have failed – – so discharge it manually.

In the end I ordered a new microwave.
Read less
11 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More