Models > SMH4150WD

SMH4150WD Maytag Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for SMH4150WD

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$25.40
This genuine OEM part for your microwave is called a door key or a door latch. This part ensures that the microwave door closes properly. If the door key does not latch, the microwave will not start. ...
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
This is a ceramic fuse for a microwave. It is just over 1 inch long. This fuse is 20 amps and 250 volts. This part powers your microwave. If your appliance is not heating properly, or is not turning o...
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
Sold individually.
No Longer Available
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
On Order
In Stock
Order within the next 1 hr and 24 mins and your part ships today!
No Longer Available
In Stock
Order within the next 1 hr and 24 mins and your part ships today!

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for SMH4150WD

Viewing 3 of 3
Door not closing properly
Fixed by these parts
Fixing
How to fix it
No heat
Fixed by these parts
Fixing Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Rozsa from MADISON, NJ
Parts Used:
DE64-00760A
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Microwave door did not close
Initially I called a Samsung recommended appliance repair outfit to fix the latch. The technician informed me that he does not fix latches. I need to buy a full new door for the microwave for $215 plus he charges $165 to come to my house. I got angry and did some research and it turned out that this is a very common problem. I ordered par t PS4229162 "door key" $6.67 then followed the instructions on a youtube video by zimsjeep
"Repair a Broken Microwave Door Latch" to install. At first I struggled a bit hooking up the spring to the frame, but then I used a slim plier to hold the spring (instead of my fingers) and that did the trick.
27 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
tad from tamarack, MN
Parts Used:
WPM0805101
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th e help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
24 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JOHN C from NORTH BEACH, MD
Parts Used:
R0713676
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Both bulbs burned out at same time
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten
18 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!