Models
>
MOD65WOW
MOD65WOW Magic Chef Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MOD65WOW
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$8.87
To access the exterior lightbulb, the bottom panel of the microwave will need to be removed. It is secured in place with screws, so will require a Philips screwdriver to remove it. Screw the new light...
In Stock
Order within the next 41 mins and your part ships today!
This metallic grease/air filter collects grease particles in the air from cooking. This filter is also removable for cleaning.
No Longer Available
In Stock
Order within the next 41 mins and your part ships today!
Special Order
Special Order
In Stock
Order within the next 41 mins and your part ships today!
In Stock
Order within the next 41 mins and your part ships today!
In Stock
Order within the next 41 mins and your part ships today!
In Stock
Order within the next 41 mins and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for MOD65WOW
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Deborah from Millersville, MD
- Parts Used:
- 8206232A
- Difficulty Level:
- Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li
... Read more
ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Pembroke, MA
- Parts Used:
- 8206232A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bulb "burnt out"
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Beech Mountain, NC
- Parts Used:
- R0705978
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
door handle broken during pulling door open
1. Researched the Internet
2. Removed the inner door panel (part way)with the
putty knife exposing the screws which were I
removed to get the old handle off.
3. Attached the new handle with the old screws
since the new part came WITHOUT screws.
4. Pushed the inner door panel back in.< ... Read more br />5. Voila! Good as new.
2. Removed the inner door panel (part way)with the
putty knife exposing the screws which were I
removed to get the old handle off.
3. Attached the new handle with the old screws
since the new part came WITHOUT screws.
4. Pushed the inner door panel back in.< ... Read more br />5. Voila! Good as new.
Read less
Was this instruction helpful to you?
Thank you for voting!