Models
>
KHMC1857BSS0
KHMC1857BSS0 KitchenAid Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for KHMC1857BSS0
Viewing 6 of 6
Manuals & Guides for KHMC1857BSS0
Click to downloadInstall
Installation Instructions
(0.45MB)
Install
Installation Instructions
(1.40MB)
Manual
Owner's Manuals
(0.15MB)
Manual
Owner's Manuals
(1.24MB)
Specs
Product Specifications Sheet
(0.09MB)
Keep searches simple, eg. "belt" or "pump".
$8.87
To access the exterior lightbulb, the bottom panel of the microwave will need to be removed. It is secured in place with screws, so will require a Philips screwdriver to remove it. Screw the new light...
In Stock
$11.52
This is a charcoal filter for an over-the-range microwave. It is designed to absorb grease before making its way into the vent, which could cause damage or build-up. It also helps to reduce odors whil...
In Stock
$35.41
This is a single grease filter for a microwave. Most microwaves have two filters, the other one being the charcoal filter, which is a different filter, sold separately, and has different maintenance i...
In Stock
$73.38
This glass cooking tray, also known as a turntable, is a genuine OEM replacement part for your microwave. The clear glass tray measures approximately 12 inches in diameter, and it is the surface that ...
In Stock
$21.50
This is the replacement lightbulb for your over-the-range microwave. It is found on the underside of your microwave and is used to illuminate your stovetop while you are cooking. This is a genuine OEM...
In Stock
$15.83
This mounting plate is a genuine OEM part for your microwave. This metal bracket is approximately 30 inches in length and is used to support your microwave when installed under cabinets. Please note t...
In Stock
$10.34
This is an authentic OEM door switch for your microwave. This switch is located behind the front panel, and works by making contact with the door hook, sending a signal that the door is closed and the...
In Stock
In Stock
The microwave door interlock switch prevents the microwave from starting if the door is open. If your microwave will not start when the door is closed, or it continues running if the door is opened, t...
In Stock
This part protects the microwave by shutting it off if there is an electrical surge.
In Stock
In Stock
$113.83
This is replacement vent grille for your microwave. You will find the grill vent either above or below the microwave door, depending on your model. If your microwave vent grill is discolored or cracke...
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for KHMC1857BSS0
Viewing 7 of 7Won’t turn on
Fixed by these parts
How to fix it
No heat
Fixed by these parts
How to fix it
Door not closing properly
Fixed by these parts
How to fix it
Exhaust fan not working
Fixed by these parts
How to fix it
Tray won’t turn
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Doesn’t shut off
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Deborah from Baltimore, MD
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken glass turntable
No repair- just replaced glass turntable.
Right part I needed with first try
Right part I needed with first try
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Millersville, MD
- Parts Used:
- 8206232A
- Difficulty Level:
- Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li
... Read more
ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Read less
Was this instruction helpful to you?
Thank you for voting!
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 P
... Read more
hillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
Read less
Was this instruction helpful to you?
Thank you for voting!