Models > JMV8000ADW

JMV8000ADW Jenn-Air Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JMV8000ADW

Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
To access the exterior lightbulb, the bottom panel of the microwave will need to be removed. It is secured in place with screws, so will require a Philips screwdriver to remove it. Screw the new light...
In Stock
$20.77
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
This grease filter is eight inches long. It is made of metal.
No Longer Available
This is a ceramic fuse for a microwave. It is just over 1 inch long. This fuse is 20 amps and 250 volts. This part powers your microwave. If your appliance is not heating properly, or is not turning o...
In Stock
In Stock
This outer door handle is half of a two piece door handle assembly. It is all white in color and is made entirely of plastic.
Special Order
This charcoal air and grease filter is a little over ten inches long. It has a metal perimeter, a metal mesh exterior, and a black charcoal interior.
In Stock
This turntable tray is eleven inches in diameter. It is made entirely of glass.
No Longer Available
This inner door handle is half of a two piece door handle assembly. It is all white in color and it is made entirely of plastic.
In Stock
$1.80
This screw is well under an inch long. It is made entirely of metal.
Special Order
No Longer Available
No Longer Available

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eddie
September 30, 2021
Microwave won’t come on. No light on control keyboard, clock and no light on side.
For model number JMV8000ADW
Fix.com logo
Hello Eddie, Thank you for the question. This is normally an indication the Fuse has Blown. When the Fuse blows it will cut off all power to the appliance. If blown it normally shows signs of damage to the Fuse. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:

Common Problems and Symptoms for JMV8000ADW

Viewing 2 of 2
No heat
Fixed by these parts
Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Deborah from Millersville, MD
Parts Used:
8206232A
Difficulty Level:
Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
207 of 303 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Pembroke, MA
Parts Used:
8206232A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Bulb "burnt out"
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
93 of 146 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from PARADISE, PA
Parts Used:
WPR9800486
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
no heat
I looked up the #1 reason for no heat for my microwave on the site , and using my model number found that 92% of the time it was the Black Sleeve Diode. Ordered the $15 part, and installed it within 30 minutes. Most of the time was used for removing the built in microwave and removing the cover. Replaced the diode by finding it on the diagram that I printed from this site (free). Very relieved that we don't need to have our custom cabinetry re-sized to accommodate a new microwave. Thank you!
28 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!