Models > JE1590SH02

JE1590SH02 General Electric Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JE1590SH02

Viewing 1 of 1
MICROWAVE Diagram and Parts List for General Electric Microwave
MICROWAVE

Manuals & Guides for JE1590SH02

Click to download
Manual
Owner's Manuals
(2.17MB)
Keep searches simple, eg. "belt" or "pump".
Microwave Fuse – Part Number: WB27X10928
$19.90
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
In Stock
Order now and your part arrives by Mar 19
Glass Cooking Tray – Part Number: WB49X10129
$84.95
There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
In Stock
Order now and your part arrives by Mar 19
Primary Door Interlock Switch – Part Number: WB24X10047
$49.39
This interlock switch is located in the door latch.
In Stock
Order now and your part arrives by Mar 19
Oven Lamp – Part Number: WB36X10131
$37.03
This microwave light assembly includes a 30-watt bulb and socket that fit inside the duct to light up the cooking area. It helps you monitor food during operation and installs easily with the appliance unplugged.
In Stock
Order now and your part arrives by Mar 19
Monitor Interlock Switch – Part Number: WB24X25397
$36.00
This switch monitor interlock helps your microwave detect when the door is properly closed. If it’s damaged, the microwave may not start. Replacing it restores safe operation and is a quick fix with basic tools.
In Stock
Order now and your part arrives by Mar 19
Diode Cable – Part Number: WB27X10037
$38.06
In Stock
Order now and your part arrives by Mar 19
Microwave Magnetron – Part Number: WB26X32629
$179.95
Genuine OEM magnetron for your microwave. Always use proper safety equipment and follow the manufacturers instructions while installing.
In Stock
Order now and your part arrives by Mar 19
THERMOSTAT – Part Number: WB20X10048
$19.90
In Stock
Order now and your part arrives by Mar 19
Turntable Guide With Rollers – Part Number: WB02X10719
This roller guide sits underneath the glass turntable tray.
No Longer Available
Turntable Coupler – Part Number: WB06X10564
No Longer Available
WAVE GUIDE – Part Number: WB06X10254
$28.79
In Stock
Order now and your part arrives by Mar 19
BOARD LATCH – Part Number: WB02X21787
$23.05
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
February 19, 2022
Unable to set the power level, run time and clock using the the push-in control dial. The microwave does respond to the push tabs such as the express and reheat tabs and will run. What part(s) need replacing? Are there instructions available that will show me how to dismantle the microwave?Thank you.
For model number JE1590SH02
Fix.com logo
Hello Fred, thank you for writing. We have researched the model you have provided and have found the part you are looking for is the Electronic Control Board Fix Number: FIX11771852. We do not have installation information but you may find a video on such sites at Youtube. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!

Common Problems and Symptoms for JE1590SH02

Viewing 5 of 5
Won’t turn on
Fixed by these parts
Fixing Fixing Fixing
How to fix it
No heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing
How to fix it
Doesn’t shut off
Fixed by these parts
Fixing Fixing
How to fix it
Tray won’t turn
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Replacing the Microwave Fuse

Replacing the Microwave Fuse

Replacing the Primary Door Interlock Switch

Replacing the Primary Door Interlock Switch

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kim from Cliffside Park, NJ
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Read less
964 of 1257 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from San Marcos, CA
Parts Used:
WB36X10131
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Bulb Replacement
Remove shroud . Two black philips head screws on side, and several on the back side. The two bottom screws on the back are special screws that a philips,straight slot, or hex screwdriver will not remove. I took a dremel tool with a thin metal grinding disc and created a straight slot through the centr of the two bottom screws. This allowe d their removal with a straight slot screwdriver. Slide the cover straight back and off. The bulb is located on the top of the microwave connected with one screw. Replaced the bulb. It has two prongs that fit into the holder. Replace screw. Slide cover back on. It slides into retaining splines on 3 sides. Replace screws, and you're in business.
Read less
47 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ralph from Brandon, FL
Parts Used:
WB27X10928
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
I diagnosed the problem incorrectly: based on a previous repair.
The old fuse is perfectly good. The new ones arrived within a day.
66 of 139 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More