Models > JES2051DN3BB

JES2051DN3BB General Electric Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JES2051DN3BB

Viewing 6 of 6
Control Parts Diagram and Parts List for General Electric Microwave
Control Parts
Door Parts Diagram and Parts List for General Electric Microwave
Door Parts
Interior Parts Diagram and Parts List for General Electric Microwave
Interior Parts
Interior Parts Diagram and Parts List for General Electric Microwave
Interior Parts
Latch Board Parts Diagram and Parts List for General Electric Microwave
Latch Board Parts
Oven Cavity Parts Diagram and Parts List for General Electric Microwave
Oven Cavity Parts
Keep searches simple, eg. "belt" or "pump".
FUSE – Part Number: WB27X10928
$10.58
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
In Stock
Primary Door Interlock Switch – Part Number: WB24X10047
$33.44
This interlock switch is located in the door latch.
In Stock
Rotating Ring Assembly – Part Number: WB06X10633
$22.53
This is the rotating ring assembly for your microwave. It rests under the glass tray, and allows it to rotate so your food can cook evenly. If you notice that your food is not cooking evenly or if the...
In Stock
DIODE-CABLE ASM – Part Number: WB27X35382
$8.54
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
In Stock
THERMOSTAT – Part Number: WB24X10163
$23.37
In Stock
Light Bulb - 125V 20W – Part Number: WB36X10063
$11.60
This part is the replacement light bulb for your microwave. This bulb is 125 volts and 25 watts. It should come on automatically when you open your microwave door, or if the microwave is running. If y...
In Stock
Synchronous Motor – Part Number: WB26X10143
$17.60
This motor rotates the glass turntable in the microwave.
In Stock
Glass Cooking Tray – Part Number: WB49X10189
$103.37
In Stock
Microwave Magnetron – Part Number: WB26X32629
$199.77
Genuine OEM magnetron for your microwave. Always use proper safety equipment and follow the manufacturers instructions while installing.
In Stock
Wave Guide Resin Cover – Part Number: WB06X10764
$13.28
In Stock
CAPACITOR HIGH VOLTAGE – Part Number: WB27X11033
$49.56
In Stock
BOARD, LATCH – Part Number: WB02X21662
$11.03
In Stock
View More

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clifford
February 18, 2023
No power ceramic not blown no burn parts are smell
For model number JES2051DN3BB
Fix.com logo
Hi Clifford, thank you for reaching out. According to our research, the issue is most probably with the noise filter, part number FIX3499636. The noise filter board reduces the voltage in the microwave to a more usable level so that the appliance operates correctly. If your microwave will not power on at all, this part may be defective and needs to be replaced to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
NOISE FILTER
$45.80
Special Order

Common Problems and Symptoms for JES2051DN3BB

Viewing 6 of 6
No heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Tray won’t turn
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing
How to fix it
Doesn’t shut off
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kim from Cliffside Park, NJ
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Read less
953 of 1228 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ralph from Brandon, FL
Parts Used:
WB27X10928
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
I diagnosed the problem incorrectly: based on a previous repair.
The old fuse is perfectly good. The new ones arrived within a day.
64 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Andover, NJ
Parts Used:
WB24X10047
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Microwave runs with the door open
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover
and test to see if that solved the problem. If so then well done!!
35 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More