Models > JES831PWF001

JES831PWF001 General Electric Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JES831PWF001

Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$10.58
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
In Stock
This part actually measures 12.5" in diameter and may be smaller than the original tray. This tray is rotated when the microwave is turned on.
In Stock
This secondary door switch is also known as a micro switch, and it is a genuine OEM replacement part for your microwave. The switch communicates with the electronic control board, to let it know if th...
In Stock
This part allows power to go one way only.
In Stock
Also known as a Sensor or Fuse. This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.
No Longer Available
$112.83
The capacitor is an electric circuit element that is used to store charge temporarily.
In Stock
No Longer Available
On Order
This part is used to generate microwave energy/heat.
In Stock
$34.41
Special Order
No Longer Available
When pushed in, this piece opens the microwave door.
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for JES831PWF001

Viewing 5 of 5
No heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Doesn’t shut off
Fixed by these parts
Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing Fixing
How to fix it
Tray won’t turn
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kim from Cliffside Park, NJ
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
953 of 1228 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ruth from New Bern, NC
Parts Used:
WB39X10003
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
A Cooking Tray developing a growing crack
The unbelievable happened. Our glass carousel cooking tray developed a crack. Each day the crack got longer. I ordered a new one on Tuesday and it arrived the next morning just before the cracked one completely cracked. I have never experienced such fast service. I highly recommend PartSelect and their helpful service.
474 of 479 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
craig from lindenhurst, NY
Parts Used:
WB39X10003
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
plate broke
replaced the plate
462 of 553 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!