Models
>
WES1450DS1BB
WES1450DS1BB General Electric Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WES1450DS1BB
Viewing 1 of 1
Manuals & Guides for WES1450DS1BB
Click to downloadKeep searches simple, eg. "belt" or "pump".
On Order
In Stock
Order now and your part arrives by Apr 10
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WES1450DS1BB
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Rich from ROSELLE, IL
- Parts Used:
- WB06X10549
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
The drive shaft of the motor was broken and had to replace drive motor and roller guid
Cut the wire connection of access door on the bottom of the oven. Once access door was removed, I took the screw holding the drive motor in place, removed the wire connector and taped the connection to oven so that it did not drop into the bottom of the oven pulled motor out. Put new motor in, put connector back on motor secured the moto
... Read more
r with the scre, put access door back in place put roller guide on the drive motor from inside of the oven and put plate on roller and turned it on for a test. it worked.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Irwin, PA
- Parts Used:
- WB49X10139, WB06X10549
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Glass dish would not rotate.
AFter I put the roller guide and glass cooking tray inside the microwave it still didn't spin. After check with the video, I was warned not to try to replace the motor which spins the tray, that there was a chance of electrical shock. I took the oven to my repair place and they made the repairs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marie from Pentwater, MI
- Parts Used:
- WB06X10549
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
wheel was not turning rotisserie table
First I took out the screws holding the sides and back to the microwave. I discovered that the rotissereie motor was also damaged, but had an old GE microwave that had quit working-took out motor from other GE(motor was the same), installed motor in microwave, lined up pin to roller assy. and that was it!
Was this instruction helpful to you?
Thank you for voting!