Models > JVM1540DM4BB

JVM1540DM4BB General Electric Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JVM1540DM4BB

Viewing 7 of 7

Manuals & Guides for JVM1540DM4BB

Click to download
Keep searches simple, eg. "belt" or "pump".
There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
In Stock
$54.19
Sold individually. Most microwaves require 2.
In Stock
The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches i...
In Stock
$40.16
The rotating ring in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If...
In Stock
$26.65
Sold individually. Appliance may take 2.
In Stock
This part is the replacement plastic rivet, or stirrer fan cover clip for your microwave. It is made of white plastic and is approximately ¼ inch in diameter, and ½ inch long. The plastic rivet holds ...
In Stock
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
In Stock
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs air...
Special Order
Used to keep the microwave door closed during operation.
In Stock
This is a replacement primary interlock door switch for your microwave. When the door is latched properly, the switch is actuated, and the microwave will operate. If your microwave will not start when...
In Stock
Screws NOT included.
In Stock
This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed t...
In Stock

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Toni
November 7, 2022
Everything is working on the microwave, it just stop heating. What part I need to repair
For model number JVM1540DM4BB
Hello Toni, thank you for your question. We have researched your model and found that the issue is probably with the Magnetron, part number FIX1481236. If that does not take care of the issue, then the problem is most likely to be related to the Thermostats, part numbers FIX2370187, and FIX2370190. If you require assistance to place an order, please contact customer service. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Problems and Symptoms for JVM1540DM4BB

Viewing 4 of 4
No heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door not closing properly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Tray won’t turn
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Gregg from Santa Ana, CA
  • Parts Used:
    WB27X35382
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Microwave made loud buzz noise and did not heat
I followed the generic trouble shooting directions on the web site. It suggested either diode, capacitor and/or magnetron. I test each. All tested OK except diode. It was supposed to measure open in one direction and appox 200k ohms in the other direction. My diode measured open in both directions (tried multiple times, multiple settings). I replaced the diode. The order process was great and it shipped immediately. I knew I was in trouble when I measured the new diode and it too was open in both directions. It was easy to install but unfortunately no joy - did not solve the problem. At this point it is likely cheaper just to buy a new one
38 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Ramona from Woodbridge, VA
  • Parts Used:
    WB49X10129
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Tray Glass Broken
I broke the tray glass in the microwave cleaning it so this was a no brainer. The best part of this was the PartSelect experience. I ordered the part on the 30th of December and received it on 3 Jan!!! I have used PartSelect before for fridge repair and had the same experience.
29 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Concetta from Glendale, AZ
  • Parts Used:
    WB02X11096
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
door latch inside of door broke off
The repair man said this would not be covered under my home warranty and that it would cost too much for him to fix, so he showed me what to do, I ordered the part and did it myself. I just had to gently pry the tabs up on the inside of the door panel using a putty knife. Once the latch is visible you unhook it from a clip and a little spring. Attached the spring onto replacement latch and snap back into place, snap the tab of the door panel back in place and your done.
24 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!