Models
>
JES1142SJ06
JES1142SJ06 General Electric Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JES1142SJ06
Viewing 1 of 1
Manuals & Guides for JES1142SJ06
Click to downloadKeep searches simple, eg. "belt" or "pump".
Special Order
Special Order
This microwave turntable guide is located under the glass turntable. It is made of plastic, and comes with rollers.
No Longer Available
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JES1142SJ06
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- CHARLES from LAKE ARIEL, PA
- Parts Used:
- WB27X10568
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Microwave oven was completely dead.
Continuity checks showed the flame sensor was open. Schematic notes it opens at 217 degrees and closes at 30 degrees. Removed sensor and placed in freezer for twenty minutes. Tested sensor and it was now closed, reinstalled and microwave worked normally. Ordered new sensor in case the original is operating at too low a temperature.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Astoria, NY
- Parts Used:
- WB27X10568
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The display was off and no buttons were working
I took the cover off and followed the electric current to see if it got as far as the display.
I did not get past the thermostat shut off where the current stoped. I jumped the thermostat and the unit worked. The part was so inexpensive that I decided to replace it rather than try and freeze the old one in hopes of "reseting" it.
I did not get past the thermostat shut off where the current stoped. I jumped the thermostat and the unit worked. The part was so inexpensive that I decided to replace it rather than try and freeze the old one in hopes of "reseting" it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chester from Port Orchard, WA
- Parts Used:
- WB39X82
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rotating glass tray broken.
A fragile glass tray providing a rotating surface for the microwave required replacement. The tray arrived scrupulously packaged to insure contents production. Unpacking was simply accomplished and installation achieved without undue effort. Thank you for prompt delivery and consideration for the attention paid to my purchase.
Was this instruction helpful to you?
Thank you for voting!