JVM230WV01 General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from Columbus, IN
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Microwave door handle broken at one attaching screw
I removed both screws to the broken handle, removed the handle, used pliers to remove a piece of broken handle remaining in the door, and installed the new handle with two screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Venice, FL
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle broken on microwave door.
Remove two phillips head screws from inside the door, position replacement handle, insert two screws into new handle assembly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Cheyenne, WY
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Old door handle cracked
Builtin Microwave
Ordered new handle through PartSelect and was confident it would fit as PartSelect also gave the length of the new hande (10 in.). Installed easily in a matter of a few minutes using the old screws.
Ordered new handle through PartSelect and was confident it would fit as PartSelect also gave the length of the new hande (10 in.). Installed easily in a matter of a few minutes using the old screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from Fairfax, VA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door handle broke
I used a Phillipshead screwdriver to remove two screws and then attached the new handle. I was happy to find the exact part that I needed, and the delivery was quick. Perfect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mat from Renton, WA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bottom half of the handle had broken loose of its bolt
Unscrewed the two screws inside the Microwave Door and set them aside. Tossed the broken handle and the bits of broken plastic still lodged in the door. Popped the new handle in place, screwed the screws into place, tightened them just enough, and started cooking dinner—quick-n-easy. Way better to DIY than hassle with scheduling a Repair Guy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carole from Big Bear Lake, CA
- Parts Used:
- WB15X322
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The hole for the screw (in the handle) broke.
Took off the old handle and attached the new one.
I was a little concerned about it being the right size. However with the graph in inches. I could tell it was correct.
I was a little concerned about it being the right size. However with the graph in inches. I could tell it was correct.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Chambersburg, PA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked Handle on built in cabinet Microwave
Open Microwave door. Use Phillips Screw driver to remove old screws. Pull handle off. Attach new handle. Save old screws since they do not come with neew handle. Hand screw them in to new handle so you don't torque it too tight and crack the new handle. Done. Should take 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Mandeville, LA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle broke off on microwave. No local parts distributor had it. I ordered the handle from partselect.com and received it quickly.
This was as simple as it gets. Using a phillips screwdriver, I simply removed the two screws from the remaining small piece of handle that was left on the microwave and placed the new handle in place. I then just used the provided screws and screded the new handle in place. $30 for the new handle rather than $400 for a new microwave!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kent from Spring Hill, FL
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle top broken
Removed broken handle and replaced it with the new one. Involved only two screws. Took less than a minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from Ormond Beach, FL
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle broke at lower screw connection
I removed the old handle and installed the new one. It took less than 5 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STEPHEN from Albany, GA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken handle
Exact Fit, Took about two minutes using phillips head screw driver.No problems
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Aubrey from Silver Spring, MD
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle was broken
Removed old handle. Cleaned area on microwave door. Screwed hanle on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Skillman, NJ
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave handle broke off
I removed broken handle, then simply attached the new handle with two screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Berwick, IA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Door Handle
Removed 2 screws. Placed new handle in position. Installed 2 self tapping screws. 2 Minutes to find phillips screwdriver, 1 minute to install screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Theodore from New Bern, NC
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave door handle broken
Used Phillips #2 screwdriver to remove old handle.
Used the two original screws to attach the replacement handle. Repair completed in less than 5 minutes!
Your web site was easy to navigate, delivery was fast, and the price was fair. Thank you, thank you, thank you!
Used the two original screws to attach the replacement handle. Repair completed in less than 5 minutes!
Your web site was easy to navigate, delivery was fast, and the price was fair. Thank you, thank you, thank you!
Was this instruction helpful to you?
Thank you for voting!