The charcoal filter in your microwave is used to remove cooking odors from the air as they circulate through the microwave vent. The filter will last between six months to one year, depending on how o...
This is a genuine OEM 40-watt light bulb for your microwave. The bulb is used inside the microwave and lights up when the door is open or when operating. The bulb can also be found underneath the micr...
This light socket is for your microwave and is designed to hold the light bulb. If the light bulb is not working, and the bulb has not burned out, it may be a problem with the light socket. This part ...
This 13.5-inch tempered glass turntable tray helps ensure even heating in your microwave. It fits securely on the rotating support thanks to three grooves underneath and is compatible with many GE and...
This 20A, 125V fast-blow glass fuse protects your microwave from power surges and electrical faults. It fits select models from GE, Hotpoint, and Frigidaire and measures approximately 6x30mm. Replace ...
The door handle mounting bracket attaches the door handle to the door.
In Stock
Order now and your part arrives by May 29
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Evelyn
July 11, 2022
When I first purchased microwave the fan will shut off now it keeps running unless I unplug the unit, what’s going on?
For model number JVM3160RF6SS
Hello Evelyn, Thank you for the question. We suggest testing the Microwave Fan Thermostat. It should test Normally open for continuity, closes at 150 degrees to turn on the vent fan. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Microwave recently starting making thumping noise when turning. Noticed when removing the glass plate that the white plastic piece in the middle does not stay level when manually turned. Is this the issue? Thank you!
For model number JVM3160RF6SS
Hi Jennifer, thank you for reaching out. The issue is probably with the Turntable Motor Coupler, part number FIX8753744. If this is not fixing the issue, we would recommend replacing the Turntable Motor, part number FIX12722592, to fix the issue. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
While screwing in the surface light cover the screw sparked and apparently caused the fuse to blow .where is the fuse located
For model number JVM3160RF6SS
Hi Mario, thank you for your inquiry. The fuse, part number FIX3486694, is located on the noise filter board, behind the control panel. We hope this information helps!
1. Unplug unit 2. Open door, remove two screws above the top trim piece, slide and remove trim. 3. Remove screw behind control board and top left corner, then release from position. 3b. Unplug all wire terminations and set control panel aside. 4. Remove two screws securing latch board, lift and rotate board
... Read moreout of position, remove three micro switches, xfer monitor switch actuator from lower pin in old board and insert in new. Install new door switches and reverse procedure to complete repair.
Note 1. Take care to located new latch board so holding tabs line up, pass through frame, and openings for door tangs line up with openings in frame before securing with screws.
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen
... Read moresions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
